Renewable Energy Biomass machines
AFRICASIAEURO PROMOTES THE USE OF RENEWABLE ENERGY BRIQUETTES AND PELLET MAKING MACHINES. THESE CAN BE IDEALLY COMBINED WITH GAZIFICATION PLANTS FOR POWER GENERATION.MACHINERY IN USE
- Crusher
: FJ 60 (Hammer mill) Suitable to shred materials
< 50 mm (diameter), < 300 mm
(length), such as: tree trimmings, wood, bark pieces, crop stalks, rice
husk, cotton stalks, cottonseed coat fragments etc. Hammers
rotate at
a high speed and shred raw material into tiny pieces. At last the
material is expelled and sieved through a screen.
- Sawdust
Dryer: ( HJ -9)
Rotary Dryer - specially designed to dry leaves, branches, sawdust, etc. It combines the function of drying and cooling thus saving 30-50% on energy. The Rotary type dryer exhibits a perfect drying functionality, easy operation, high efficiency. Drying capable for materials with moisture content of 30-60%.
- Briquetting
machine
Briquettes are made by shredding Biomass and sawdust. The briquette is shaped under very high pressure.
Almost all types of Agro-Forestry waste can be used. After drying, compressing takes place under high pressure high pressure and temperature. The biomass briquette is characterized by high density, smallest in size. Having better combustion properties, briquettes represent a superior substitute to coal or firewood. A bio-fuel briquette is typically 45-80mm in diameter, hollow, square or hexagonal form with a 15-20mm bore through the body.
- Carbonization
stove ( hot air flow type)
A Gas flow carbonization stove greatly increases the carbonization rate from 80% to a carbonization rate of +- 99%, and shortens the carbonization time from 24 hours to 6 hours at present. The Furnace represents the structure of an air storage chamber, it fully reuses exhaust fumes produced during the carbonization process. 60% of the redundant smoke can be used in drying and carbonization both saving energy and reducing cost.
