Rss

  • redit
  • delicious
  • youtube

Archives for : February2014

BOMBI IMPREGNATION MACHINE

NUMBER: AAEE-8453

BOMBI IMPREGNATION MACHINE FOR SALE – 3600mm
(RESIN IMPREGNATOR / SATURATOR)
3600mm WORKING WIDTH
Y.O.M.: 1998/1999
AS NEW CONDITION
142″ INCHES WORKING WIDTH
LOW NUMBER OF WORKING HOURS
THE MACHINE HAS BEEN USED FOR SAMPLES ONLY AND AS A CONVEYOR DURING REGULAR PRODUCTION.
PROCEDURE – WADDING (WEB) IS DIPPED IN A LIQUID DISPERSION, NEXT SUCKED WITH VACUUM IN ORDER TO TAKE OUT THE RESIN SURPLUS.
WEIGHT OF THE WADDING – 50 TO 150 GR/M2.
WADDING PASSES – BETWEEN BELT AND ONE PERFORATED STAINLESS STEEL ROLL.
RESIN TYPE CAN BE ACRYLIC OR VINYL, WITH ANTI-FOAM AGENT IN.
BELT WIDTH – 3600mm (141.7 INCHES).
BELT TYPE – PERFORATED FIBERGLASS NET, TEFLON COATED.
ROLLS WIDTH – 3910mm (154 INCHES).
STAINLESS STEEL TANK TO HOLD \RESIN BATH.
LEVEL CONTROL.
AIR DRIVEN MEMBRANE PUMP, TO KEEP CONSTANT LEVEL IN THE TANK.
SUCTION SLOT, MADE OF STAINLESS STEEL.
AIR/LIQUID SEPARATOR, TO SEPARATE AIR FROM RESIN.
SEPARATOR TANKL: STAINLESS STEEL.
AIR SUCKING PUMP IS MOTOR DRIVEN.
POSSIBLITY OF ADJUSTING AIR SUCTION FLOW, IN ORDER TO CALIBRATE THE AMOUNT OF RESIN REMAINING IN THE WADDING (THE WEB).
CONTROL PANEL SEPARATE FROM MACHINE.
BELT SPEED: 1.5 TO 5 M/MIN.
SPEED VARIATION 3-PH MOTOR FREQUENCY CONVERTER.
SPEED IN SYNC WITH CROSS LAPPER, SPEED REFERENCE SIGNAL.
AVAILABLE SPEED REFERENCE SIGNAL FROM CONTROL PANEL
SET THE MACHINE IN SYNC AFTER THE SATURATOR.
VOLTAGE: 575 V/60 HZ/3-PHASE.
MACHINE FITTED WITH SPECIAL FIXTURES IN ORDER TO FIT A 2-ROLL FOAM APPLICATOR.

(PICTURES AVAILABLE)

QUANTITY: 1

SAN GIACOMO SOCK KNITTING

OLD POST – SAN GIACOMO SOCK KNITTING MACHINERY NUMBER AAEK-5999

San Giacomo sock knitting machines

San Giacomo sock knitting machines


Giacomo sock knitting machines

WORSTED MACHINES

WORSTED MACHINERY WITH DETAILS BELOW :

Worsted Mill machines

Worsted Mill machines

REFER to Numbers on picture

RIETER C60 CARDS

NUMBER: AAEK-8521

RIETER C60 CARDS
Y.O.M.: 2006-2008
(THREE CARDS YEAR 2006) + (FOUR CARDS YEAR 2008)
COILER SIZE 40 x 46 INCH
SINGLE LICKERIN, NEEDLE TYPE
NO SB MODULE
IGS ON ALL CYLINDERS
Q-PACK FIXED IN 3 CARDS AND IN STOCK FOR 4 CARDS
MACHINES COME WITH ALL AVAILABLE PARTS AND GRINDING MACHINE
IN EXCELLENT CONDITION IN AN EXPORT ORIENTED SPINNING MILL
QUANTITY: 7

NON WOVEN LINES

NON WOVEN LINE

NUMBER: VL-K-8431

NONWOVEN LINE SUITABLE TO PRODUCE INSULATION MATERIAL

FOR : WOOLEN INSULATION MATERIAL AND OTHER NONWOVEN PRODUCTS MADE FROM WOOL
-CPL. OPENING, BLENDING
OPENING LINE FOR OPENING COARSE AND FINE AND INCLUDES A LUBRICATION UNIT
-HOPPER FEEDER WITH CHUTE (TOP)
-CARDING MACHINE 2200mm WORKING WIDTH
CARD PRODUCTION : APPROXIMATELY 150 KG/H
-LAPPER (LONGITUDINAL LAPPER)
-STRATO HORIZONTAL LAPPER
-THERMO BONDING OVEN. DOUBLE BELT OVEN
2500mm WORKING WIDTH. 105mm OPENING HEIGHT BETWEEN THE BELTS
-LONGITUDINAL CUTTING MACHINE WITH 4 KNIVES
-CROSS CUTTER

QUANTITY: 1

Sulzer Terry looms

NUMBER: AAEK-3048 (old listing)

SULZER TPS600 TERRY LOOMS WITH JACQUARD 3600mm YEAR 1997 TO 2003
MAKE: SULZER
MODEL: TPS600
WIDTH: 3600mm
YEAR:
2 ARE YEAR 1997
2 ARE YEAR 1999
3 ARE YEAR 2002
2 ARE YEAR 2003
WEFT FEEDERS IRO ORION
MOTION WITH JACQUARD STAUBLI CX870-2688 HOOKS
THE ONES OVER YEAR 2000 ARE WITH ELECTRONIC DOBBY AND CONTROLLER JC4
QUANTITY: 9

LAROCHE TEARING LINE

NUMBER: AAEK-9486

Laroche tearing lines are used to shred old textiles, rags into fibers in order to re-use them for manufacturing.
The quantity of fibers used depend on its length and condition.
Normally we use between 5-10 % of old fibers (shredded stock) and the rest virgin fibers.

LAROCHE TEARING LINE- 1000mm -3 CYLINDERS
LINE CONSISTS OF:
TOWER FEEDER
3 CYLINDERS
EXIT TRANSITION DUCT
2 SPARE CYLINDERS
ALL ELECTRIC CONTROLS COMPLETE
QUANTITY: 1

SOMET ALFA looms

NUMBER: AAEK-9123

SOMET ALPHA LOOMS YEAR 2010 WIDTH 3400mm – 8 COLOR
2010 YEAR
CX100 JACQUARD
8 COLOR
2 BEAMS AND CLOTH ROLLER
NOT RUNNING – STOPPED
QUANTITY: 2 SETS

NUMBER: AAEK-9360

SOMET ALPHA YEAR 2006 WIDTH 3600mm JACQUARD
Y.O.M.: 2006
WIDTH 3600mm
8 COLORS
STAUBLI CX870 2400 JC5 JACQUARD
1.5 BEAMS
1.5 CLOTH ROLLER
4 WEFT FILLING PREFEEDS
WITH ALL ACCESSORIES
QUANTITY: 6 SETS

BUSER FLAT PRINTING MACHINE

NUMBER: AAEK-9363

BUSER FLAT PRINTING MACHINE
Y.O.M.: 2003
WIDTH 1650mm
COLORS: 14
WIDTH BELT: 2000mm