Rss

  • redit
  • delicious
  • youtube

Archives for : April2014

SECTIONAL WARPER

NUMBER AAE-P0429

SUCKER-MULLER HACOBA USK-SENSOCON

Y.O.M. : 1996
SECTIONAL WARPER, 3370mm (cylindrical) + 1500mm ( conical), double creel, 560 positions. paraffin device, control of tension and ionization device to eliminate static electricity,

Sectional warper

Sectional warper

IMG_6856

IMG_6857

IMG_6858

IMG_6859

SANFORIZING RANGE

NUMBER: AAEM-0675

SANFORIZING RANGE 126INCHES 3200mm

  1. STAINLESS J-SCRAY WITH 7.5-HP DRIVEN PULL ROLL
  2. SKY-IN STAND WITH GUIDER SPECIALTY AIR GUIDERS ON BRIDGE
  3. TIMING CAN (OVERHEAD MOUNT)
  4. MORRISON COLE SPRAY HOUSE
  5. 2001 MORRISON COMPRESSIVE SHRINKING MACHINE T-262, 135″ FACE WIDTH ON CYLINDER WITH 132.5″ RUBBER BELT (3″ THICK), 25-HP DRIVE MOTOR
  6. MORRISON PALMER T-262, WITH 130″ FACE WIDTH 84″ DIA. CYLINDER WITH 126″ FELT BLANKET
  7. 3-COOLING CANS (OVERHEAD MOUNT)
  8. MENZEL A-FRAME WINDER 130SBE, 10-HP ELECTRIC DRIVE ON LAY-ON ROLL.
  9. MAIN DRIVE, CONTROLS, MOTORS, ETC.

COMPLETE SPINNING PLANT

COMPLETE SPINNING PLANT

CONSISTING OF

NUMBER: AAEM-0244

COMPLETE CARDED SPINNING PLANT

COMPLETE PLANT OF CARDED SPINNING COMPOSED OF:

PREPARATION DEPARTMENT

  • (2) X CELLS (IRON PANELS) WITH OPENING MILLING MACHINE
  • (1) X CLEANING PICKER MODEL WITH REVOLVING REEL EQUIPPED WITH CYCLONE
  • INLET AND SUCTION NOZZLE OF EXIT MATERIAL

  • (1) X OPENER WITH CYLINDERS ENTRY AND DRUM WITH WOOD LAGS AND STEEL ROUND POINT; MACHINE EQUIPPED WITH INLET CELL (WITHOUT SUCTION) AND OUTLET HOPPER
  • (1) X METERING AND MIXING APPARATUS FOR ENSIMAGE (INOX STEEL)
  • CARDING SECTION

    (1) X CARD SET OCTIR MODEL TITANO, H=2500MM, YEARS 1977, COMPOSED OF:

    • METERING FEEDER WITH MECHANICAL BALANCE STORAGE SILOS AND FEEDING TABLE
    • BREAST WITH INLET GROUP, FEED-ROLLER DIAMETER 400, DRUM DIAMETER 1650, COMBER DIAMETER 1270, 7 CARDING COUPLES + FLYING GROUP

    • 1ST CARD WITH CONVEYOR CYLINDER FROM BREAST COMBER TO CARD DRUM, DRUM DIAMETER 2000, COMBER DIAMETER 1500, 6 CARDING COUPLES + FLYING GROUP AND FLEECE DOFFING COMB

    • CONVEYOR COMPOSED WITH 1ST PART WITH LAPPER SLIVERS, UNDERGROUND CONNECTION TO 2ND PART WITH ROD SLIVER, 2ND PART WITH FOLDER TRUCKS FOR LAP RECTILINEAR DISTRIBUTION ON FEEDING TABLE

    • 2ND CARD WITH INLET GROUP, FEED-ROLLER DIAMETER 350, DRUM DIAMETER 2000, COMBER DIAMETER 1500, 8 CARDING COUPLES + FLYING GROUP AND FLEECE DOFFING COMB

    • HYDRAULIC PRESS : STRAINER (PERALTA) WITH CYLINDER DIAMETER 300, COMPLETE WITH DOFFER CYLINDER AND FLEECE DOFFING COMB

    • CONVEYOR COMPOSED WITH: 1ST PART WITH FOLDER TRUCK, UNDERGROUND CONNECTION TO 2ND PART WITH ROD SLIVER, 2ND PART WITH FOLDER TRUCKS FOR LAP RECTILINEAR DISTRIBUTION ON FEEDING TABLE

    • 3RD CARD WITH INLET GROUP, FEED-ROLLER DIAMETER 350, DRUM DIAMETER 2000, COMBER DIAMETER 1500, 8 CARDING COUPLES + FLYING GROUP AND FLEECE DOFFING COMB

    • 4TH CARD WITH CONNECTION TO 3RD CARD SLIVER + CONVEYOR CYLINDER DIAMETER 300, DRUM DIAMETER 2000, COMBER DIAMETER 1500, 8 CARDING COUPLES + FLYING GROUP AND FLEECE DOFFING COMB

    • DIVIDER TO SIMPLE RUBBING PREPARED FOR 216 YARNS, SAME MECHANICAL DIVISION OF MM 10.8; MODEL 1 LACE 1 YARN, COMPLETE WITH OSCILLATING HOLLOW LAP ROLLERS

    • MACHINE EQUIPPED WITH: FRAME FOR CYLINDERS CLEANER MODEL OCTIR, ROLLERS FOR DIVIDER AND ROLLER, N.1 DIVISION OF 240 YARNS

    SPINNING DEPARTMENT

    (2) X SELFACTING BIGAGLI MODEL B5, YEAR 1980,

    550 SPINDLES EACH

    NUMBER: AAEM-0413

    CONE TO CONE SAVIO ESPERO

    RIGHT OR LEFT SIDE

    60 HEADS FROM CONES

    AUTOMATIC DOFFING WITH DELIVERY ON CONE 6″ (152mm)

    TAPER 4°20′

    INSPECTOR CONTROL

    WAXING DEVICE

    ONE MACHINE WITH SPLICER MESDAN 490L

    PEYER CLEARERS MODEL OPTIQS 531

    DOUBLE EMPTY CONES MAGAZINE

    NO 2 DOFFING TROLLEYS

    MAGITEX VACUUM/BLOWER

    QUANTITY: 1

    NUMBER: AAEM-0382

    OPEN END PLANT RIETER TRUETZSCHLER

  • 01 TRUTZSCHLER BLENDOMAT MODEL BDT 019, YEAR 1997 , W.W. 2.300 mm, BELT 22.000 mm,
  • 01 RIETER MONOTAMBUR CLEANER MODEL B4/1, YEAR 2005
  • 01 RIETER CAGE CONDENSER MODEL A21 , YEAR 2005
  • 01 SONECA MOTOR FUN
  • 01 RIETER UNICLEAN MODEL B-1, YEAR 2004
  • 01 TRUTZSCHLER BLENDER MODEL BOA 046 ,YEAR 1997 , W.W. 1.200 mm, BELT 2.500 mm, WHIT CAGE CONDENSER LVSA
  • 01 TRUTZSCHLER FUN MODEL MTV 425, YEAR 1997
  • 01 TRUTZSCHLER MULTIMIXER MODEL MPM 8/236, YEAR 1990, W.W. 1.200 mm 8 CELLS,
  • 01 TRUTZSCHLER CAGE CONDENSER MODEL LVSA, YEAR 1997
  • 01 TRUTZSCHLER OPENER MODEL CNT 097, YEAR 1997, W.W. 1.200 mm , WHIT SILOS BEC962 AND WHIT CAGE CONDENSER LVSA
  • 01 TRUTZSCHLER FUN MODEL MTV 425, YEAR 1997
  • 01 TRUTZSCHLER MODEL LT AIR SEPARETOR
  • 01 TRUTZSCHLER MODEL EAS ELECTRICAL PANEL
  • 04 TRUTZSCHLER CARDS MODEL DK 803, YEAR 1997, CHUTE FEED TRUTZSCHLER
  • MODEL DFK, AUTOMATIC EXIT CAN MODEL KH 950/1000/ FOR CANS 40”

  • 01 TRUTZSCHLER CARDS MODEL DK 903, YEAR 2001, CHUTE FEED TRUTZSCHLER MODEL DFK, AUTOMATIC EXIT CAN MODEL KH 950/1000 FOR CANS 40
  • 01 RIETER MODEL RSB-D30 DRAWING FRAME WITH AUTOLEVELLER YEAR 1998 FEEDING CANS 40″ , CREEL WITH 6 COUPLINGS, SINGLE DELIVERY, EXIT CANS 16″ X 42″., AUTOMATIC CANS CHANGE
  • 01 RIETER MODEL RSB-D40 DRAWING FRAME WITH AUTOLEVELLER YEAR 2008 FEEDING CANS 40″ , CREEL WITH 6 COUPLINGS, SINGLE DELIVERY, EXIT CANS 16″ X 42″., AUTOMATIC CANS CHANGE
  • 02 RIETER OPEN END MODEL BT 905 , 1 X YEAR 1998 1 X YEAR 2001, NO. 224 ROTORS EACH, WAXING DEVICE, 2 PIECERS , BARCO CLEARERS, EXIT CONE 6” 2°
  • 01 CENTRAL SUCTION AND CLIMATIZATION FOR BLOW ROOM AND CARDING
  • 01 CENTRAL SUCTION AND CLIMATIZATION FOR OPEN END
  • HORIZONTAL PRESS JOVAL MODEL JV/30,
  • 01 FORK LIFT MITSUBISHI FD20
  • 01 TRANS PALLET
  • 1200 CAN 16”
  • 30 CANS 40”
  • NUMBER: M-0470

    SAVIO SAJ15 WINDER

    48 POSITIONS
    MK-15 CLEARERS
    WAXING UNITS

    NUMBER: AAEM-0499

    AFIS II USTER

    WITH PC & PRINTER
    METTLER PE360 SCALE

    QUANTITY: 1

    NUMBER: M-0136

    TOYODA RY5 RING FRAMES

    YEAR : 1988/1991
    NO OF SPINDLES : 3 X 496, 6 X 400
    SPINDLE GAUGE : 75
    LIFT : 8”
    SPINDLE WHARVE DIA : 20.2
    DRAFTING : PK225
    CRADLE : SHORT
    RING DIA : 44mm / 48mm
    MAIN MOTOR : 18.5KW
    BOTTOM ROLLER DIA : 28.5/28.5/28.5
    INVERTER : AVAILABLE.

    QUANTITY: 9

    NUMBER: M-0529

    ELECTROJET COMPLETE

    BLOWER

    WITH 20 METER OF TRACK

    QUANTITY: 2

    NUMBER: AAEM-0518

    MURATEC TFO TWISTERS

    (5) X MURATEC TFO TWISTERS

    TYPE: 368 – II

    YEAR: 1997

    NUMBER OF HEADS: 144

    DELIVERY: 6”

    POT SIZE: Ø 160mm X H 155mm

    INVERTER: AVAILABLE

    (3) X MURATEC TFO TWISTERS

    TYPE: 373 – II

    YEAR: 1997

    NUMBER OF HEADS: 112

    DELIVERY: 8”

    POT SIZE: Ø 185mm X H 245mm

    INVERTER: N/A

    QUANTITY: 8

    NUMBER: AAEK-3810

    KARL MAYER ECONOMATIC SECTIONAL WARPER

    MAKE: KARK MAYER

    MODEL: ECONOMATIC

    WIDTH: 2200mm

    YEAR 2000

    WITH BENNINGER CREEL 720 POSITIONS YEAR 1990

    QUANTITY: 1

    NUMBER: AAEM-0554

    COMPLETE RIETER OPEN END SPINNING MILL

    CONSIST OF

    BLOWROOM

    1 X UNIFLOC 1/2, RIETER YEAR 1987

    1 X CLEARER B3/4, RIETER, YEAR 1999

    2 X MONOCYLINDER B4/1, RIETER, YEAR 1987,1989

    1 X UNICLEAN B11, RIETER, YEAR 1999

    1 X UNIMIX B7/3, RIETER, YEAR 1987

    1 X UNIMIX B7/3R, RIETER, YEAR 1987

    2 X B3/3S, RIETER, YEAR 1987

    2 X CONDENSOR A2/1, RIETER, YEAR 1987

    5 X ERM CLEANER B5/5, RIETER, YEAR 1987

    2 X CONTIMETER B0/1, RIETER, YEAR 1987

    1 X JOSSI SEPARATOR, YEAR 2001

    3 X MIX CHAMBER, SN3U ( RUSSIA), YEAR 1988

    1 X BALE PRESS H200A, AUTEFA GERMANY , YEAR 1986

    2 X SCREW COMPRESSOR COMPAIRE CYCLON 222, YEAR 1998

    1 X PACKAGING FOIL MACHINE FP30 FILMA ITALY, YEAR 1998

    1 X FILTER STATION LUWA, YEAR 1987

    1 X ELECTRONIC FIRE PROTECTION DEVICE TESLA, YEAR 1987

    CARDS

    24 X CARD, FALUBAZ CZ 693-3A, POLAND, YEAR (12 X 1984, 6 X 1987, 6 X 1988)

    24 X AEROFEED U, RIETER, YEAR 1987

    DRAW FRAMES

    3 X DRAW FRAME RSB-D30, RIETER INGOLSTADT, YEAR (2 X 1998, 1 X 1999)

    OE MACHINES

    3 X OPEN END SPINNING MACHINE, R20, RIETER INGOLSTADT, YEAR 1998

    240 ROTORS

    COMBER CYLINDER OB20 AND OF21

    ROTOR DIAMETER 30 – 31 – 35MM

    SPEED 80 – 125.000 R.P.M.

    YARN : 15,5; 20; 25; 29,5; 40; 55 TEX

    MATERIAL : COTTON, VISCOSE, POLYESTER, BLENDS

    PRODUCTION : 1.600 KG / DAY / 1 MACHINE ( BY 29,5 TEX , 4 SHIFTS)

    NUMBER: M-0517

    MARZOLI BCX 16A ROVING FRAMES YEAR 1993 -120 POSITIONS

    MARZOLI BCX 16A

    ROVING FRAMES

    YEAR: 1993

    SPINDLES: 120

    DRAFTING: 3/3 SKF PK 1600

    FLYER SIZE: 16 X 6”

    TYPE OF FLYER: CLOSED

    CRADLE: SHORT

    STAFF LENGTH: 520mm

    INVERTER: AVAILABLE

    MAIN MOTOR: 13 KW

    OHTC: MAGITEX

    CREEL ROWS: 4

    BOTTOM POSITIVE CLEARER: REVOLVING TYPE

    QUANTITY: 2

    NUMBER: AAEK-3546

    OERLIKON SCHLAFHORST WINDERS AUTOCONERS

    MALE: OERLIKON SCHLAFHORST

    MODEL: 148

    YEAR 2005

    338 V

    20 HEADS

    RIGHT HEAD STOCK

    FEEDING BY CADDY

    SPINDLE IDENTIFICATION

    2ND PREPARATORY FOR COPS

    TUBE CLEANER

    C.T.S DEVICE

    AUTOTENSE DEVICE TYPE FX

    TERMOSPLICER

    VARIOPACK

    PROPACK

    CLEARER MODEL USTER QUANTUM 2

    DETACHING HEAD UQC2 IMK-C15-F23

    DELIVERY CYLINDRICAL EXIT

    TRAVERSE 4” SOLEIL

    VOLTAGE 380.3.50 HZ

    01 TROLLEY FOR DOFFER

    AIR EXIT INTO THE FLOOR

    QUANTITY: 6

    NUMBER: K-8948

    SAVIO ESPERO WINDER (MAGAZINE TYPE)

    YEAR 1998-99

    56 SPINDLES EACH

    MAGAZINE FEEDING WITH STEEL DRUM

    WITH USTER D5 YARN CLEARER

    YOKE TYPE CONE CRADLE

    CONE ANGEL 5°57

    TRAVERSE 6″

    WITH OVERHEAD CLEANER

    POWER: 380V

    50HZ

    CONDITION -VERY GOOD (RUNNING AT 100% COTTON)

    QUANTITY: 1

    NUMBER: AAEM-0504

    DAEWON T06 TWO FOR ONE TWISTER YEAR

    MODEL: T06

    MACHINE: TWO FOR ONE TWISTER

    YEAR: 1994

    256 SPINDLES PER SET

    H-BOBBIN: 384 PIECES PER SET

    CAPACITY: 1 KG

    QUANTITY: 5

    NUMBER: AAEM-0341

    LEZZENI MARIO TF/DS 150 HOLLOW SPINDLE TWISTING MACHINE

    MAKE: LEZZENI MARIO

    YEAR 2003

    192 SPINDLES

    THIS IS A DOUBLE SIDED MACHINE TO PRODUCE FANCY TWISTS FROM YARN (YARN TO YARN MACHINE)

    THE STANDARD MACHINE IS EQUIPPED WITH 2 DELIVERY-ROLLERS WITH INDEPENDENT MOTOR CONTROL.

    SPINDLE GAUGE: 150 mm

    RING: 115 MM (TO BE CONFIRMED)

    HOLLOW SPINDLE SPEED: 0 TO 12000 RPM

    TUBE: 420mm

    RING SPINDLE SPEED: 0 TO 8000RPM

    CREEL: 5 PACKAGES PER SPINDLE (SO MAX NUMBER OF INPUT THREADS PER

    SPINDLE IS 5 PLUS THE WRAPPING YARN)

    FULLY COMPUTERISED AND SETTING CAN BE PROGRAMMED AND STORED

    DIMENSIONS:

    LENGTH: 18.5 METERS,

    WIDTH: 4.08 METERS (INCLUDING CREELS)

    HEIGHT: 2.1 METERS

    ALSO INCLUDED :

    LEZZINI MARIO BOBBIN WINDER TYPE SLV/L 200, YEAR 2003

    POWER: 3 ~ 415V, 50HZ

    QUANTITY: 1

    NUMBER: AAEM-0048

    MARZOLI RING FRAMES

    MODEL RST 1

    YEAR 2000

    WITH BLOWER TRAVELER MAGITEX

    TUBE DE 220mm

    OF 1200 SPINDLES

    RING OF 38mm

    GAUGE 70mm

    LINK TO MURATA E7/2

    OF 30 SPINDLES

    USTER QUANTUM

    WAXING, DELIVERY 6” 4-20 DEGREES

    YEAR 1990

    QUANTITY: 1

    NUMBER: AAEK-9855

    RIETER BLOW ROOM LINE -1

    LINE 1

    1 X RIETER UNIFLOC AUTOMATIC BALE OPENER

    MODEL A.10

    2300mm HEAD

    YEAR: 1995

    1 X RIETER UNICLEAN

    MODEL B.10

    YEAR: 1995

    1 X RIETER UNIMIX BLENDER

    MODEL B.7/3

    YEAR: 1995

    1 X RIETER UNIFLEX

    MODEL B60

    YEAR: 2000

    1 X TRUTZSCHLER FREE STANDING CONDENSER

    MODEL LVSA WITH STAND

    YEAR: 2000

    1 X RIETER WASTE OPENER

    MODEL B2/5

    YEAR: 1997

    NUMBER: AAEK-8078

    RIETER R1 OE SPINNING MACHINES

    MODEL: R1

    260 SPINDLES

    YEAR 2002

    ROTOR DIAMETER 40

    WAXING

    2 ROBOTS

    USTER UPG 5 CLEARER

    QUANTITY: 1

    NUMBER: AAEK-8148

    RIETER COMBER AND UNILAP

    (5) RIETER E 60 H COMBER

    (1) RIETER E 62 H COMBER

               YEAR: 1999/2001
    
               CAN DIAMETER: 24” X 48”
    
               CENTRAL: SUCTION
    
               NITTO TOP COMB
    
               VOLTAGE/FREQUENCY: 400/50
    

    (1) RIETER E 30 UNILAP

               YEAR: 1999
    
               SUCTION: INDIVIDUAL
    
               CREEL: DRAG
    
               24 CREEL END
    
               SUCTION: INDIVIDUAL
    

    (8) TROLLEY

    NUMBER: K-8205

    ICBT RIETER TEXTURIZING MACHINE FTF 12 E2 AD

    ICBT

    RIETER

    TEXTURIZING MACHINE FTF 12 E2 AD

    YEAR: 1999

    POSITIONS: 96 (2×48)

    MECHANICAL SPEED: 400-1200 m/min

    TEXTURING HEATER: 100-180°C

    LENGTH: 2.5 METER

    SETTING HEATER: 120-150°C

    LENGTH: 1.2 METER

    TAKE UP BOBBIN CYLINDRIC REVERSE 250

    QUANTITY: 1

    ICBT

    RIETER TEXTURIZING MACHINE AS BEFORE

    YEAR 1997

    POSITIONS: 16

    QUANTITY: 1

    NUMBER: AAEK-8221

    TWISTING MACHINES: RIETER YEAR: 2005-2007 144 SPINDLES

    TWISTING RIETER 2 PLY

    YEAR: 2005

    TYPE: DT -10-50-0

    144 SPINDLES

    TWISTING RIETER 1 PLY

    YEAR: 2006

    TYPE: DT -10-50-0

    144 SPINDLES

    TWISTING RIETER 1-2 PLY

    YEAR: 2007

    TYPE: DT/10-500

    144 SPINDLES

    TWISTING RIETER 1-3 PLY

    YEAR: 2007

    TYPE: DT – 10 -500

    144 SPINDLES

    NUMBER: AAEK-8280

    RIETER BT 923 – 320

    BRAND NAME: RIETER

    TYPE: BT 923 – 320

    YEAR: 2004

    380 V

    50 HZ

    198 A

    101 KW

    ROTOR φ 54 mm DIAMOND

    OPENING ROLLER OK 61 D

    320 ROTOR (UNIT)

    4 x 20 CONIC

    QUANTITY: 1

    NUMBER: AAEK-8329

    RIETER BT 923

    YEAR: 2007

    ROTORS: 360

    WAXERS

    NO ROBOT

    NO YARN CLEARERS

    DELIVERY ON CONES OR: 4˚ 20′

    QUANTITY: 1

    NUMBER: AAEK-8330

    RIETER 923

    YEAR: 2005

    ROTORS: 320

    WAXERS

    NO ROBOT

    NO YARN CLEARERS

    DELIVERY ON CONES OR: 4˚ 20′

    QUANTITY: 1

    NUMBER: AAEK-8387

    RIETER ELITEX OPEN END MODEL BT 905

    YEAR: 1997

    ROTOR: 50mm

    OPENING ROLL: MK74DND2

    USTER POLYGUARD

    240 SPINNING POSITIONS

    2 ROBOTS

    CONE FEED

    CYLINDRICAL BOBBIN

    NUMBER: AAEK-8411

    RIETER E62 COMBERS YEAR 2000

    MODEL: E62

    YEAR: 2000

    8 COMBING HEADS

    QUANTITY: 3

    NUMBER: AAEK-8483

    RIETER CARDING MACHINES

    YEAR: 2002

    TYPE: C51-H, HI-PER CARD

    WITH RIETER CHUTE TYPE A-70

    WITH RIETER CBA COILER

    CAN SIZE: 40″ X 48″

    AUTOMATIC CAN CHANGER

    AUTOLEVELLER

    380 V, 50 HZ

    QUANTITY: 16 SETS

    NUMBER: AAEK-8806

    RIETER C51H CARDS

    MAKE: RIETER

    MODEL: C51H

    YEAR 2002

    380V, 50HZ

    QUANTITY: 10

    NUMBER: AAEK-8732

    OPEN END MACHINE RIETER ELITEX BT905

    RIETER ELITEX BT905

    YEAR 2001

    380V

    50HZ

    210.5 A

    106.2 KVA

    240 ROTORS

    CONOCITY 2º 6″

    2 ROBOTS

    WAXING

    QUANTITY: 1

    NUMBER: AAEK-8521

    RIETER C60 CARDS

    YEAR: 2006-2008

    YEAR 2006 TO 2008

    COILER SIZE 40 x 46 INCH

    SINGLE LICKERIN, NEEDLE TYPE

    NO SB MODULE

    IGS ON ALL CYLINDERS

    Q-PACK FIXED IN 3 CARDS AND IN STOCK FOR 4 CARDS

    MACHINES COME WITH ALL AVAILABLE PARTS AND GRINDING MACHINE

    IN EXCELLENT CONDITION IN AN EXPORT ORIENTED SPINNING MILL

    HAS Q PACK VERSION 9 NEW TYPE

    QUANTITY: 5

    NUMBER: AAEM-0583

    RIETER RSB951 DRAW FRAMES YEAR 1995-1997

    YEAR 1995-1997

    18×42

    WITH SILVER MONITOR II

    NUMBER: AAEM-0585

    MURATA 2×1 TWISTER AND KAMITZU ASSEMBLING WINDER

    YEAR 1991

    SERIAL 91SX 31513001

    SERIAL 91SX 31513002

    SERIAL 91SX 31513003

    MODEL 373

    FEEDING BY CYLINDRICAL TUBE SUPPLY FROM ASSEMBLING WINDER KAMITZU

    120 SPINDLES EACH ( 60 EACH SIDE )

    TAKE UP WITH 6″

    CONICITY 4⁰ 20

    SPINDLES DRIVE BY BELT

    VOLTAGE 380.3.50 HZ.

    MAIN MOTOR KW. 30

    QUANTITY: 3

    KAMITZU ASSEMBLING WINDER

    YEAR 1991

    SERIAL 244

    120 SPINDLES ( 60 EACH SIDE )

    TAKE UP 6″

    CYLINDRICAL EXIT 6″ TRAVERSE

    FEEDING BY INTERNAL CREEL

    TWO PLY EACH HEAD WITH ELECTRONIC YARN BRAKE CONTROL

    METER COUNTER HEAD BY HEAD

    ELECTRONIC SENSOR FOR YARN BREAKAGE

    VOLTAGE 380.3.50 HZ.

    MAIN MOTOR 2.2 KW.

    QUANTITY: 1

    SPARE PARTS AND ACESSORIES INCLUDED IN THE DEAL:

    • SPARE PARTS AND INSTRUCTION MANUALS
  • ELECTRICAL DIAGRAMS

  • GEARS AND PULLEY FOR TWIST AND SPEED

  • 200 KILOGRAMS PLASTIC TUBES FOR ASSEMBLING WINDERS

  • NUMBER: AAEM-0670

    RIETER UNIFLOC A-11

    MAKE: RIETER

    MODEL: A-11

    YEAR 2008

    1 X RIETER BALE PLUCKER

    DETACHER: 2041mm

    RAIL LENGTH: 30,000mm

    QUANTITY: 1

    (EMAIL US FOR PICTURES)

    NUMBER: AAEK-9296

    RIETER CARDING C-51

    YEAR: 2002-2004

    TYPE: C51-H, HI-PER CARD

    WITH RIETER CHUTE TYPE A-70

    WITH RIETER CBA COILER

    CAN SIZE 40″ X 48″

    AUTOMATIC CAN CHANGER

    AUTOLEVELLER

    380 V

    50 HZ

    EXCELLENT CONDITION

    QUANTITY: 16 SETS

    NUMBER: AAEM-0911

    MURATA TWO FOR ONE TWISTER AND DOUBLER

    TYPE: 363-II

    YEAR: 1994: 1 SET: (120 SPINDLES)

    YEAR: 1995: 1 SET: (128 SPINDLES)

    YEAR: 1996: 1 SET: (128 SPINDLES)

    YEAR: 1997: 3 SET: (128 SPINDLES)

    POT DIAMETER: 165mm

    NEEDLE THREADING

    QUANTITY: 6 SETS

    MURATA DOUBLE WINDER

    TYPE 60

    YEAR 1996

    60 SPINDLES (30 SPINDLES EACH SET)

    QUANTITY: 2

    NUMBER: AAEM-0747

    TRUTZSCHLER DRAWING FRAMES, TRUTZSCHLER CARD MACHINES, AND RIETER BLOW ROOM

    YEAR 2004 TO 2010

    TRUTZSCHLER DRAWING FRAMES

    2 MACHINES TD03 YEAR 2006

    2 MACHINES TD03 YEAR 2010

    SILVER CAN DIAMETER 400mm

    TRUTZSCHLER CARD MACHINES

    5 MACHINES TC03 IDF YEAR 2004

    6 MACHINES TC03 IDF YEAR 2006

    1 MACHINES TC07 IDF YEAR 2008

    CAN DIAMETER 1000mm

    RIETER BLOW ROOM

    RIETER UNIFLEX

    1 RIETER B60 YEAR 2001

    1 RIETER B60 YEAR 2006

    1 RIETER B11 YEAR 2000

    SULZER P7300

    NUMBER: AAEM-0267

    SULZER P7300 HP YEAR 2005 WIDTH 3600mm

    MODEL 2005
    FABRIC ENI 3600 mm
    TURNOVER 400
    NUMBER OF COLORS AND REPORTING WOFF OF 2
    ECCENTRIC
    10 FOOT
    BEAM DIAMETER mm RUNS UNTIL 1100
    WARP ELECTRONIC RELEASE
    FABRIC PULL ELECTRONIC
    LENO EDGE STRUCTURE OR VACUUM SUCTION
    10 FRAME
    1 TABLE SAW 5 PCS
    SAW LOWER FLAT 6 AD.
    REED 2 NAME PROJECT NUMBER 1
    BEAM NUMBER 2
    KNITTING MACHINES MISCELLANEOUS 1 IN 10 IN TIMING CESID
    NO MIDDLE DIVIDER
    FINS AND POWER AD 9OOO
    BATCHING AND QUALITY CONTROL-PANEL
    2 ACCUMULATOR
    1 TABLE 18 MEKIK

    QUANTITY: 50

    SULZER LOOMS 2

    NUMBER: AAEK-9344

    SULZER P7300HP YEAR 2005 WIDTH 3600mm

    SULZER P7300HP B360 2 EP D12 R
    PROJECTILE LOOMS
    YEAR 2005
    WIDTH 3600mm
    TWIN BEAMS
    REED WIDTH 363cm
    400 RPM
    CAM MOTION
    10 SHAFTS
    10 HEALD FRAMES
    2 COLORS
    2 WEFT FEEDERS
    WITHOUT TLL LENO OR VACUUM SUCTION
    2 REEDS
    5 STOP BARS
    9000 DROPPERS
    9000 WIRES
    2 WARP BEAMS
    FLANGE DIAMETER 1100mm
    BATCHING MOTION WITH INSPECTION TABLE

    QUANTITY: 60

    SULZER

    NUMBER: AAEK-8836

    SULZER P7300 LOOMS

    WIDTH: 3600mm
    YEAR 2005
    2 COLORS
    1.5 BEAM, CLOTH ROLLER
    MOTION: ECCENTRIC
    3 SETS BEEMS 1000mm DIAMETER
    5 SETS LAMEL SAW
    THERES TUCKING AND VACCUM
    18 SETS SHUTTLES
    10 FRAMES
    2 WEFT ENGINE

    QUANTITY: 60 SETS AVAILABLE