We apologize

sorry

Apologizing for not being able to continue open comments

After frequent breeches of our rule of business ethics we found ourselves compelled to stop commercial advertising on our spinning page.

We have now put a moderation rule in place that requires all commenters to register.

We regret this decision had to be made because of a wide spread use of infraction of business ethics and rules in the past.

We also moderated older comments as a result.

Please send us your comments as usual however you will need to register on our page.

With best wishes for a prosperous 2015,

sincerely

Heinz Rainer
CO

AFRICASIAEURO

TERRY TOWEL FACTORY WEAVING DEPARTMENT VAMATEX 1151

E-NUMBER: AAEM-5301 (1313THWKXX12) L

TERRY TOWEL FACTORY WEAVING DEPARTMENT
VAMATEX 1151 ES 3600mm WORKING WIDTH, WITH DOBBY
(3) X YEAR 1996
(1) X YEAR 2000
(2) X YEAR 1999
(2) X YEAR 1997
(2) X YEAR 1995

5 SETS WITH 16 HEALD FRAMES, 20 SHAFTS
5 SETS WITH 12 HEALD FRAMES, 16 SHAFTS

FACTORY ONCE SELLS WHOLE WITH DOBBY LOT AS ABOVE THEN THEY WILL SELL LOOMS WITH JACQUARDS

(6) X VAMATEX LEONARDO YEAR 2003 WITH JACQUARDS
J5 STAUBLI 2688 JACQUARD WORKING WIDTH 2600mm
(4) X VAMATEX LEONARDO YEAR 2003 WITH VRT SYSTEM/JACQUARD
J5 STAUBLI 2688 JACQUARD WORKING WIDTH 2600mm
(4) X VAMATEX LEONARDO YEAR 2003 WITH JUMBO JACQUARD
J5 STAUBLI 6144 JACQUARD WORKING WIDTH 2600mm
(2) X VAMATEX LEONARDO YEAR 2003 WITH GROSS JACQUARD
6144 JACQUARD WORKING WIDTH 2600mm

TOTAL QUANTITY: 26 LOOMS

Laser ENGRAVING MACHINE FOR FABRIC OT-LAS

E-NUMBER: AAEA-1272 (0101GHBXX12) A

Laser ENGRAVING MACHINE FOR FABRIC OT-LAS Model GOAL 500 WORKING WIDTH 1500 MM
Useful working width 1600 mm (suitable for finished fabrics, which generally have a width of 150/152 cm.)
Feeding and delivery of the fabric from small roll

GOAL 500 is a machine for decorating by engraving of large surfaces on a single area or larger/multiples

by means of automated devices for moving the piece forwards
Moreover, it is possible to process large areas with a composition of smaller modules when higher resolution is necessary.
These treatments can be effected on the surfaces of fabrics, leather, artificial leather, coated materials, flocked fabrics, etc.

Quantity: 1

SSM-DOUBLER DATA PS6-D

E9NUMBER: AAAE1186 (1212GHBXX11) A

SCHÄRER SCHWEITER METTLER DOUBLER DATA PS6-D YEAR 2001 60 POSITIONS
SECTIONS: 12
MANUALS: YES (SERVICE)
TUBE DIAMETER, EMPTY: 49 MM
TUBE DIAMETER, FILLED: 250 MM
TRAVERSE: 130 MM TO 207 MM
ENDS/CREEL: 2
STOP MOTION ON EACH POSITION: YES
YARN CUTTER: YES
LENGTH MEASURING: YES
LENGTH RANGE: 0 TO 9,999,999 METERS
VOLTAGE: 575
AMPERAGE: 32
1994 SSM DIGICONE WINDER FOR DYE TUBES, 24 POSITIONS

QUANTITY: 1

EH-WHA PLATINUM OIL STENTER

E-NUMBER: AAEM-5222 (131332SBNK12UF) L

EH-WHA PLATINUM OIL STENTER YEAR 2008 WIDTH 3400mm
10 CHAMBERS
ROLLER WIDTH 3600mm
WORKING WIDTH MAXIMUM 3400mm
HORIZONTAL CHAIN PIN TYPE
MACHINE SPEED: 80 ~ 100 M/MIN
THERMAL OIL HEATING SYSTEM
ELECTRIC POWER 3 PHASE X :60HZ X 380V
INVERTER DRIVING SYSTEM

CONSISTING OF THE FOLLOWING PARTS:

1. ENTRANCE: A. GUIDE RING
B. TENSION BAR
C. TEXTAR GUIDER
D. 2 BOWL PADDING MANGLE

2. AUTO OVERFEED: A. ELECTRONIC CONTROL TYPE OVERFEED DEVICE
B. RAIL GUIDER WITH AUTOMATIC POSITION CONTROL DETECTOR
C. SELVEDGE UNCURLER
D. OVERFEED TENSIONER
E. SELVEDGE KEEPER
F. RAIL SAFETY DEVICE
G. SCREW EXPANSION ROLL
H. TOUCH SCREEN T.V. MONITOR SYSTEM

3. DRY & HEAT SETTING CHAMBER: A. 10 X HOT AIR CIRCULATION FAN & MOTOR
B. AIR FLOATING SYSTEM HOT AIR INJECTION NOZZLE
C. HEATING EXCHANGER
D. EXHAUST DUCT WITH FAN MOTOR

4. COOLER: AIR COOLING FAN & NOZZLE
5. MAIN DRIVE: A. DRIVING ARRANGEMENT
B. 2 X BOWL COOLING CYLINDER
C. PLAITING DOWN DEVICE
6. MAIN CONTROL PANEL

CONDITION: STAND ON MILL FLOOR
AVAILABLE: IMMEDIATELY

QUANTITY: 1