Rss

  • redit
  • delicious
  • youtube

POY EXTRUSION FILAMENT EQUIPMENT

NUMBER: AAEK-9018

COMPLETE POLYESTER FILAMENT MANUFACTURING PLANT YEAR 1995
WITH:
TWO ZIMMER POLYCONDENSATION LINES COMPLETE
TWENTY LINES COMPLETE OF BARMAG & TEIJIN DIRECT SPINNING SYSTEMS WITH TEIJIN POY 4 LINES AND TEIJIN HSDY 6 LINES AND BARMAG POY 8 LINES AND BARMAG POY 2 LINES
DRAW TEXTURIZING MACHINES WITH TEIJIN DTY 17 SETS AND BARMAG DTY 20 SETS
IT REQUIRES MORE OR LESS 1,000 PCS 40 FEET CONTAINERS FOR SHIPMENT
QUANTITY: 1

NUMBER: AAEK-9063

BARMAG PP TAPE EXTRUSION LINE YEAR 1996
Y.O.M: 1996
MODEL: FB7-1300-HT
EXTRUDER, MODEL 9E107
CAPACITY: 350 KG/H
FILTER AUTO CHANGING SCREEN BELT
EXTRUDER PUMP WITH DRIVE
SLOT DIE
COOLING BATH
HAUL-OFF UNIT
CUTTING DEVICE
STRETCHING UNIT 1 WITH 3 GODETS
WASTE STRIP FEEDBACK UNIT
OVEN, AIR HEATED
STRETCHING UNIT 2, WITH 5 GODETS
ANNEALING STAND, WITH 3 GODETS
STRETCHING UNIT 3, WITH 3 GODETS
HEATING DEVICE FOR STRETCHING UNIT 2
HEATING DEVICE FOR ANNEALING STAND
SUCTION DEVICE
CONTROL CABINET
CONTROL PANEL
ADDITIONAL EQUIPMENT THAT CAN BE SOLD, IF REQUIRED
DOSING UNIT, COMPLETE
SAHM WINDERS, 206 HEADS FOR BOBBINS CORE DIAM. 90 MM

NUMBER: AAEK-8941

COMPLETE POLYPROPYLENE FIBER SPINNING LINE ESL YEAR 1996-1997
YEAR: 1996/1997
MAXIMUM PRODUCTION CAPACITY APPROXIMATELY 600 KG/H
INCLUDES JET CLEANING DEVICE (PYROLYSIS), LABORATORY EQUIPMENT , BALE PRESS, ETC.
THE EXTRUDER ITSELF IS DESIGNED AND MANUFACTURED BY ESL ENGLAND, ORIGINALLY BUILT 1996.
IT HAS 150MM DIAMETER 30:1 L/D RATIO EXTRUDER SCREW.
BARREL IS HEATED IN 8 ZONES. ZONES 1 TO 7 HAVE 12KW HEATERS, ZONE 8 IS 14KW
COOLING BLOWERS AT ZONE 7 & 8.
EXTRUDER DRIVE IS 313.6KW @ 1830RPM, TYPE LAK 4250A THRIGE-SCOTT
GEARBOX : ROSSIMOTORIDUTTORY. TYPE MR2L-320
LINE IS APPROXIMATELY 65 M LONG AND HAS 8 SPINNERETS.
EXISTING SPINNERETS ARE SUITABLE FOR FIBERS 8 DTEX TO 70 DTEX.
FURTHER BLANKS FOR SPINNERETS ARE AVAILABLE AND CAN BE DESIGNED ACCORDING TO REQUEST (AT A SPECIALIZED FACTORY).
THE BLANKS ARE PAID ALREADY, ONLY THE DRILLINGS FOR THE WHOLES NEED TO BE PAID EXTRA.
ONE COOLING COMPRESSOR AVAILABLE.
LINE CONTROL BY TOUCH SCREEN.
POLYMER PIPES ARE DEPHEUYL-HEATED.
ADDITIONAL INFORMATION:
EXTRUDER:
LENGTH (HEATED): 4500MM
DIAMETER: 220MM
SPINNING PLATES: 660 X 110MM
1ST AND 2ND GODET:
2 X SEPTETT ( 7 ROLLERS)
DIAMETER OF ROLLERS: 320MM
COLOR INJECTION: 4 COMPONENTS
MANUFACTURER: WOYWOOD PLASTICOLOR
PLASTICOLOR 3200 WITH 4 DOSAGE SCREWS
(1 X GRANULATE + 3 ENTRIES FOR ADDITIVES)
CONTROL: PC CONTROL WITH TOUCH SCREEN
MANUFACTURER: ESL
CRIMPER MANUFACTURER: ESL
CUTTER: MANUFACTURER: FLEISSNER
2 CUTTING WHEELS AVAILABLE
(CUTTING LENGTHS 60MM, 90MM OR 120MM POSSIBLE)
BALE PRESS: MANUFACTURER: KENN MILLS ENG. LTD.
TWIN PRESS T 60
3 STRETCHING OVENS BEHIND EACH OTHER: TOTAL LENGTH 5000X 750MM.
ADDITIONAL DETAILS:
SPINNERETS:
26 PCS. OUTSIDE DIMENSION 110 X 660MM
WITH EACH 1000 HOLES – HOLE DIAMETER 2MM FOR FIBER 70 DTX AND 110 DTX, PROFILE “PAKMAN”
37 PCS. OUTSIDE DIMENSION 1110 X 660MM
WITH EACH 6950 HOLES – HOLE DIAMETER 0.75MM FOR FIBER 17 DTX AND 30 DTX, PROFILE “PAKMAN”
22 PCS. PRE JET PLATES (FOR FILTER MATERIAL) OUTSIDE DIMENSION 110 X 660MM WITH EACH 1700 HOLE – HOLE DIAMETER 3MM, PROFILE “ROUND”
FURTHER 30 PCS. ARE WITHOUT HOLES (AS MENTIONED ABOVE)
LABORATORY EQUIPMENT:
1 TEXTECNO FAFEGRAPH M
1 TEXTECHNO VIBROMAT M
1 MEASURING DEVICE ZWEIGLE S 160
1 SCREEN NSC-MULTISYNE 2 A
1 MICROSCOPE ZOOM
1 MEASURING UNIT FOR MEASURING BAGGINESS
1 LABORATORY CARD = TABLE CARDING MACHINE FOR MANUAL USE
1 MICRO SCALE PRECISA
COOLING COMPRESSORS CLIMAVENETA,
CONSISTING OF:
2 X 2-CYLINDER MACHINE
BECAUSE OF OVER CAPACITY ONLY ONE 2-CYLINDER-COMPRESSOR WAS USED.
THE SECOND ONE WAS NOT USED BECAUSE OF OVER CAPACITY.

NUMBER: AAEK-8482

FLEISSNER SIEVE DRUM DRYER WIDTH 3500mm OVERHAULED IN 2008
FLEISSNER SIEVE DRUM DRYER WITH 6 DRUMS
TOTALLY OVERHAULED IN 2008
THE UNIT GOT NEW MOTORS/DRIVERS, NEW INSULATION, NEW BURNERS
CONTROL SYSTEM FROM SIEMENS S7 (TOUCH SCREEN)
ALL EQUIPMENT WAS DELIVERED FROM FLEISSNER OR OEM’S OF FLEISSNER
THE UNIT CONSISTS OF: TAKE-OFF, IMPREGNATION, CHILL-CALENDER, STORAGE, CUTTING, & TAKE-UP
WORKING WIDTH: 3500mm
DIAMETER OF THE DRUMS: 1400mm
3 BURNERS FROM THERMOTEC
CALIBRATING CALENDER WORKING WIDTH: 3700mm
VARIABLE FREQUENCY MOTOR FROM 1 METER/MIN TO 50 METERS/MIN
2 COOLING UNITS
FABRIC ACCUMULATOR: 20 METERS
CUTTING ASSEMBLY DRIVE WITH 4 KNIVES, 4000mm
FOULARD WORKING WIDTH 2500mm
THE UNIT IS IN ABSOLUTE GOOD CONDITION
QUANTITY: 1

NUMBER: AAEK-9129

CONFAB DEHYDRATION COLUMN YEAR 1985
DEHYDRATION COLUMN
DESIGN PRESSURE: 184 PSI + 15′ LIQUID HEAD AT 300F, OR FULL VACUUM AT 300F
CARBON STEEL SHELL SA-516-70
HAS FIFTY FIVE 304 SS TRAYS
10′ DIAMETER x 88′ SEAM TO SEAM
104′ OAH
43,500 GALLON CAPACITY
DRY WEIGHT 140,000 LBS
BUILT BY CONFAB INDUSTRIAL IN 1985

NUMBER: AAWK-9142

NEUMAG BCF SPIN DRAW TEXTURIZING PLANT
NEUMAG 1 x 6 POSITIONED 2-END BCF SPIN DRAW TEXTURIZING PLANT FOR THE PRODUCTION OF SOLUTION DYD MONOCOLURED POLYPROPLENE YARN
PLANT WITH 2 x 2 POSITIONS , TOTALLY 3 EXTRUDERS
YEAR: 1996
TECHNICAL DATA:
NUMBER OF EXTRUDERS: 3
EXTRUDER CAPACITY: 3 x 150 KG/H
NUMBER OF SPINNING POSITIONS: 6
NUMBER OF SPINNING POS./EXTRUDER: 2
PITCH: 1000mm
NUMBER OF END/SPINNING POS.: 2
YARN TITER RANGE: 1000-3000 DTEX
NUMBER OF FILAMENTS (PROPOSAL): 135
DPF: 158 TEX
FILAMENT CROSS-SECTION: TRILOBAL
NUMBER OF TEXTURIZING POSITIONS: 6
PRODUCTION SPEED AVERAGE: 2400 m/min
TEXTURIZING SPEED MAX.: 3000 (3.400) m/min
NUMBER OF ENDS/TEXTURIZING POS: 2
EFFICIENCY: 97%
NUNBER OF WINDERS:6
NUMBER OF BOBBINS PER WINDER: 2
SIZE OF BOBBIN TUBES:
ID/OD: 73/80 mm
LENGTH: 292 mm
SIZEW OF BOBBINS:
STROKE: 250 mm
MAX: 320 mm
MAX VOLUME: 18,8
WINDER TYPE: 3002 R

DESCRIPTION OF PLANT EQUIPMENT:

CONVEYING AND METERING SYSTEM
EXTRUSION SYSTEM
SPINNING EQUIPMENT
QUENCHING EQUIPMENT
DRAW-TEXTURIZING MACHINE
PROCESS AND CONTROL SYSTEM
ELECTRICAL EQUIPMENT FOR 6 POSITIONED BCF LINE
CABLING
1 PCS 6 POSITION / 3 EXTRUDER NEUMAG BCF LINE (YEAR 1996)
1 PCS STEEL STRUCTURE ( IT WAS WELDED TYPE THEN AT 2013 COMPLETELY CHANGED
WITH NEW BOLT+NUT TYPE TO EASY ERECTION AND DEMONTAGE)
2 PCS 90 KW / 10 BAR ECOMAC BRAND AIR KOMRESSOR ( YEAR 2012)
1 PCS 32M3 AIR DRIER (YEAR 2012)
1 PCS WATER COOLING CHILLER 250000 KCAL (YEAR 2004)
1 PCS PREHEATING OVEN ( YEAR 2013)
1 PCS SPINNERET BURNING OVEN (YEAR 2013)
MACHINE IN RUNNING CONDITION AND AT 2002 AND 2012
REVISION MANY PARTS OF MACHINE. MANY GODETS , MECHANICAL PARTS AND ETC
WAS RENEWED.ALL ELECTRICAL CABLES AND CONNECTIONS , WATER ,AIR AND DUCT
PIPES ARE COMPLETELY RENEWED AT 2012. ALL WINDERS ARE CHECKED AND WELL
CARED. STELL STRUCTURE WAS ESTABLISHED NEW AT 2012 .GODETS AND TEXTURE PARTS
MAINLY RENEWED.
MACHINE IN GOOD CONDITION RUN ANYTIME WITHOUT ANY PROBLEM.

Comment (1)

  1. Nice blog here! Also your site loads up fast! What host are you using? Can I get your affiliate link to your host? I wish my site loaded up as quickly as yours lol

Leave a Reply