Rss

  • redit
  • delicious
  • youtube

NEEDLE LOOMS

NUMBER: AAEK-4275

ASSELIN A50S-SD2 NEEDLE LOOMS 3600mm YEAR 1999
Y.O.M. : 1999
WIDTH 3600mm
DOWNSTROKE
2 BOARDS
ENTRY BOARD 5000 N/LM AND EXIT BOARD 7000 NEEDLES/LM
1500 STROKES/MIN
WITH DCIN IN-FEED
HUB: 60mm
QUANTITY: 2

NUMBER: AAEK-9004
JAKOB MULLER NH2 53 8-27 NEEDLE LOOMS YEAR 2013
NEEDLE LOOMS
Y.O.M: 2013
WEFT INSERTION: ELECTRONIC DOUBLE WEFT THREAD FEED WITH STEP MOTOR
BINDER THREAD: ELECTRONIC WITH STEP MOTOR
DATA ACQUISITION: BLUE TOOTH
DRIVE: BRAKE MOTOR WITH SLOW MOTION
TAKE DOWN REGULATOR: ELECTRONIC REGULATOR WITH STEP MOTOR NEOPRENE TAKE DOWN ROLLER
RUBBER DRIVE: ELECTRONIC WITH STEP MOTOR
WARP STOP MOTION: 6 RAILS
POWER: 400 VOLT 3 PHASE 50/60 HZ
NUMBER OF HEDDLE FRAMES: 16 OF 16
LOOM CONDITION: EXCELLENT
ALL MACHINES IN SHOWROOM CONDITION
FULL 3 MONTH WARRANTY BASED UPON 3 SHIFT OPERATION

NUMBER: AAEK-9021
JAKOB MULLER MBJ2 LABEL LOOM YEAR 1993
MODEL: MBJ2
Y.O.M.: 1993
TAFFETA (8 REPEAT OF 12 CM EACH)
JACQUARD SEC 640 HOOKS
QUANTITY: 1

NUMBER: AAEK-9097
MULLER ND 2-64G NEEDLE LOOM YEAR 1980
Y.O.M.: 1980
HARNESSES 12 OF 16 FRAMES INCORPORATED
SHED TYPE G SHED MOTION
BINDER THREAD
WEFT FEED MUTRANS I
TAKE DOWN DOUBLE ROLL KNURLED STEEL TAKE DOWN
PRODUCTION MONITOR 3 SHIFT PICK LOCK
PICK REPEAT 8 PICK CHAIN REPEAT
4 RAIL STOP MOTION
DRIVE BRAKE MOTOR
ACCESSORIES
VOLTAGE 220/380 V, 3 PH, 60 HZ
FULLY RECONDITIONED (FULL WARRANTY)
QUANTITY: 1

NUMBER: AAEK-9098
MULLER NG3 28 2-66 NEEDLE LOOM
CLOCK ELECTRONIC
WEFT FEED WEFT FEED SYSTEM WITH THREAD SUPERVISIONS
BINDER THREAD
WEAVING SYSTEM WEAVING SYSTEM II +III
DRIVE BRAKE MOTOR WITH SLOW MOTION
CONTROLS ECO CONTROL WITH FAULT INDICATORS AND SPEED CONTROL
TAKE DOWN REGULATOR MECHANICAL REGULATOR DOUBLE KNURLED TAKEOFF ROLLERS
WARP STOP MOTION 4 RAILS
POWER 380 VOLT 3 PHASE 50 HZ
NUMBER OF HEDDLE FRAMES 12 OF 16
EXCELLENT CONDITION
FULL 3 MONTH WARRANTY BASED UPON 3 SHIFT OPERATION

NUMBER: AAEK-9099
MULLER NG 28 G 66 NEEDLE LOOM YEAR 2000
Y.O.M.: 2000
HARNESSES 12 OF 16 FRAMES INCORPORATED
SHED TYPE G
BINDER THREAD SYSTEM 3 (SYSTEM 1+ 2 CAPABLE)
WEFT FEED SINGLE WEFT INSERTION, MUTRANS
TAKE DOWN DOUBLE ROLL KNURLED STEEL TAKE DOWN, STEEL PRESS ROLLERS
PRODUCTION MONITOR MUCONTROL MONITOR SYSTEM
PICK REPEAT 8-48 CHAIN LINK
STOP MOTION 6 RAIL STOP MOTION
DRIVE BRAKE MOTOR
ACCESSORIES SEATBELT TYPE WEBBINGOPTIONAL WARP BEAM LET-OFF
AIR WEFT VOLTAGE
EXCELLENT CONDITION

Comment (1)

  1. AFRICASIAEURO.COM Textile Machines specialists

Leave a Reply