Rss

  • redit
  • delicious
  • youtube

SEWING EQUIPMENT

This list of sewing equipment has become available. Machinery is still in use.

NUMBER: AAEK-8843
MAGETRON MITHO 2002 YEAR 2000 AUTOMATIC SEWING MACHINE
MAGETRON
MODEL: MITHO 2002
YEAR: 2003
DOUBLE ENTERING
SINGLE ENTERING: MINIMUM WIDTH: 300mm; MAXIUM WIDTH: 1800mm
MINIMUM LENGTH: 300mm; MAXIMUM LENGTH: 2500mm
DOUBLE ENTERING: MINIMUM WIDTH: 300mm; MAXIMUM WIDTH: 850mm
MINIMUM LENGTH: 300mm; MAXIMUM LENGTH: 2500mm
MACHINE IS WORKING
QUANTITY: 1

NUMBER: AAEK-9614
REWINDING MACHINE PP-2
PP-2 REWINDING MACHINE IS INTENDED FOR MEASURING / REWINDING FABRIC.
THIS EQUIPMENT IS WIDELY USED IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES

SPECIFICATIONS:
LENGTH: 2530MM
WIDTH: 1220MM
HEIGHT: 1060MM
MAX WIDTH OF ROLL: UP TO 1850MM
WEIGHT: 100 KG
REWINDABLE WEIGHT OF ROLL: UP TO 45 KG
DIAMETER OF ROLL: UP TO 450MM
RE-WINDING SPEED: 50 METERS PER MINUTE
ROLL INSTALLATION: MANUAL
РР-2 IS AVAILABLE IN 3 VERSIONS:
РР-2/А – STANDARD, REWINDING FABRIC, METER COUNTER
РР-2/B – VERSION WITH MANUAL CUTTING, METER COUNTER
РР-2/С – VERSION WITH AUTOMATIC CUTTING, METER COUNTER

NUMBER: AAEK-9614
REWINDING MACHINE PP-2
PP-2 REWINDING MACHINE IS INTENDED FOR MEASURING / REWINDING FABRIC.
THIS EQUIPMENT IS WIDELY USED IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES

FOR SALE OF FABRICS

SPECIFICATIONS:
LENGTH: 2530MM
WIDTH: 1220MM
HEIGHT: 1060MM
MAX WIDTH OF ROLL: UP TO 1850MM
WEIGHT: 100 KG
REWINDABLE WEIGHT OF ROLL: UP TO 45 KG
DIAMETER OF ROLL: UP TO 450MM
RE-WINDING SPEED: 50 METERS PER MINUTE
ROLL INSTALLATION: MANUAL
РР-2 IS AVAILABLE IN 3 VERSIONS:
РР-2/А – STANDARD, REWINDING FABRIC, METER COUNTER
РР-2/B – VERSION WITH MANUAL CUTTING, METER COUNTER
РР-2/С – VERSION WITH AUTOMATIC CUTTING, METER COUNTER

NUMBER: AAEK-9735
FABRIC HANDLING/CUTTING AND INSPECTION MACHINES
1. LIFTING TABLE FOR UPHOLSTERY ST-3
USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE.
LIFTING TABLE WITH PNEUMATIC DRIVE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR

MANUFACTURING OF UPHOLSTERED FURNITURE.

– THE HEIGHT OF THE LIFTING TABLE CAN BE ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, PNEUMATIC CYLINDER, AND AN AUTOMATIC DRIVE;

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP);

– THE TABLE HAS A DRAWER FOR STORING BASIC UPHOLSTERY TOOLS.

SPECIFICATIONS:
TABLETOP DIMANSIONS: 900 TO 2000mm
MAXIMUM LIFTING HEIGHT: 1280mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300mm
MAXIMUM LIFTING CAPACITY: 160 KG
WORKING PRESSURE: 6 BAR
LIFTING SPEED: 15 CM/S
DROPPING SPEED: 15 CM/S
OCCUPIED SURFACE OF THE BASIS: 700X1850 mm
WEIGHT: 150 KG

THE TABLE STRUCTURE IS MADE OF STEEL. THE PNEUMATIC CYLINDER D125X600 IS FOOT-CONTROLLED AT

BOTH SIDES OF THE TABLE. LEVERAGE RAISES THE TABLE TOP TO A MAXIMUM HEIGHT OF 1280 mm AND

LOWERS IT TO 300 mm.

THE PARTICLE BOARD TABLE TOP IS COVERED WITH HIGH-QUALITY FITTED CARPET AND FURNISHED WITH

STAINLESS STEEL SLIDE BLOCKS WHICH HELP TO MOVE FURNITURE PIECES ON THE TABLE AS WELL AS

GROUNDING ELECTROSTATIC CHARGES. PREVENTION OF ELECTROSTATIC CHARGES AVOIDS THE

OCCURRENCE OF SPARKS AND FIRE.

2. LIFTING TABLE FOR UPHOLSTERY ST-3/BR

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR UPHOLSTERED FURNITURE

MANUFACTURING.

– THE HEIGHT OF THE LIFTING TABLE CAN BE QUICK ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, SERVO-MOTOR, AND AN AUTOMATIC DRIVE;

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES;

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP);

– THE TABLE HAS A DRAWER FOR STORAGE BASIC UPHOLSTERY TOOLS.

MAIN ADVANTAGES OF THE LIFTING TABLE FOR UPHOLSTERY:

– INCREASES PRODUCTIVITY OF MANUFACTURING;

– INCREASES QUALITY OF THE FURNITURE;

– INCREASES WORKER’S COMFORT (IT WON’T BE NECESSARY FOR WORKER TO WORK ON KNEES TO

UPHOLSTER UNDER THE FURNITURE);

– TAKES THE LOAD OFF THE EMPLOYEE’S SPINE;

ACCESSORIES:

– STEEL TUBES (ARMS) FOR RAISING FURNITURE OVER THE TABLE FOR EASY ACCESS TO ITS BOTTOM PART;

– TABLE TOP COVERED WITH 2MM THICK STAINLESS STEEL.

SPECIFICATIONS:

TABLETOP DIMENSIONS: 940×1940 mm
MAXIMUM LIFTING HEIGHT: 1280 mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300 mm
MAXIMUM LIFTING CAPACITY: 130 KG
WORKING PRESSURE: 6 BAR
LIFTING SPEED: 15 CM/S
DROPPING SPEED: 15 CM/S
OCCUPIED SURFACE OF THE BASIS: 700X1850 mm
WEIGHT: 150 KG

3. LIFTING TABLE FOR UPHOLSTERY ST-3/WR

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR UPHOLSTERED FURNITURE

MANUFACTURING.

– THE HEIGHT OF THE LIFTING TABLE CAN BE QUICK ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, SERVO-MOTOR, AND AN AUTOMATIC DRIVE;

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES;

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP);

– THE TABLE HAS A DRAWER FOR STORAGE BASIC UPHOLSTERY TOOLS.

MAIN ADVANTAGES OF THE LIFTING TABLE FOR UPHOLSTERY:

– INCREASES PRODUCTIVITY OF MANUFACTURING;

– INCREASES QUALITY OF THE FURNITURE;

– INCREASES WORKER’S COMFORT (IT WON’T BE NECESSARY FOR WORKER TO WORK ON KNEES TO

UPHOLSTER UNDER THE FURNITURE);

– TAKES THE LOAD OFF THE EMPLOYEE’S SPINE;

– VERY RELIABLE AND STABLE STRUCTURE IS MADE OF STEEL PROFILES;

– TESTED AND APPROVED BY THE LEADING POLISH AND FOREIGN FURNITURE MANUFACTURERS;

ADDITIONAL ACCESSORIES:

– SAFETY FRAME UNDER THE TABLETOP THAT PREVENTS FURTHER DROPPING OF THE TABLE IN SITUATIONS

WHEN IT GETS BLOCKED BY SOMETHING (MAY BE ORDERED ON REQUEST).

– TABLE TOP COVERED WITH 2mm THICK STAINLESS STEEL;

– TABLE TOP WITH CARPET COVERING;

– TABLE TOP WITH PLYWOOD COVERING.

SPECIFICATIONS:

MAXIMUM LIFTING HEIGHT: 1200 mm

MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300 mm

MAXIMUM LIFTING CAPACITY: 170 KG

WORKING PRESSURE: 6 BAR

OCCUPIED SURFACE OF THE BASIS: 700 x 2000 mm

4. LIFTING TABLE FOR UPHOLSTERY ST-3/1

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR UPHOLSTERED FURNITURE

MANUFACTURING.

– THE HEIGHT OF THE LIFTING TABLE CAN BE QUICK ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, SERVO-MOTOR, AND AN AUTOMATIC DRIVE;

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES;

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP);

– THE TABLE HAS A DRAWER FOR STORAGE BASIC UPHOLSTERY TOOLS.

MAIN ADVANTAGES OF THE LIFTING TABLE FOR UPHOLSTERY:

– INCREASES PRODUCTIVITY OF MANUFACTURING;

– INCREASES QUALITY OF THE FURNITURE;

– INCREASES WORKER’S COMFORT (IT WON’T BE NECESSARY FOR WORKER TO WORK ON KNEES TO

UPHOLSTER UNDER THE FURNITURE);

– TAKES THE LOAD OFF THE EMPLOYEE’S SPINE;

– VERY RELIABLE AND STABLE STRUCTURE IS MADE OF STEEL PROFILES;

– TESTED AND APPROVED BY THE LEADING POLISH AND FOREIGN FURNITURE MANUFACTURERS;

– TABLE TOP COVERED WITH 2MM THICK STAINLESS STEEL.

SPECIFICATIONS:
TABLETOP DIMENSIONS: 940×1940 mm
MAXIMUM LIFTING HEIGHT: 1280 mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300 mm
MAXIMUM LIFTING CAPACITY: 130 KG
WORKING PRESSURE: 6 BAR
LIFTING SPEED: 15 CM/S
DROPPING SPEED: 15 CM/S
OCCUPIED SURFACE OF THE BASIS: 700×1850 mm
WEIGHT: 150 KG

5. LIFTING TABLE FOR UPHOLSTERY ST-3 WITHOUT TABLETOP

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE.

ASSEMBLY TABLE WITH PNEUMATIC DRIVE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR

MANUFACTURING OF UPHOLSTERED FURNITURE.

– THE HEIGHT OF THE ASSEMBLY TABLE CAN BE ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, PNEUMATIC CYLINDER, AND AN AUTOMATIC DRIVE

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES;

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP);

– THE TABLE HAS A DRAWER FOR STORING BASIC UPHOLSTERY TOOLS.

SPECIFICATIONS:

MAXIMUM LIFTING HEIGHT: 1280 mm

MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300 mm

MAXIMUM LIFTING CAPACITY: 160 KG

WORKING PRESSURE: 6 BAR

LIFTING SPEED: 15 CM/S

DROPPING SPEED: 15 CM/S

OCCUPIED SURFACE OF THE BASIS: 700×1850 mm

WEIGHT: 150 KG

THE TABLE STRUCTURE IS MADE OF STEEL. THE PNEUMATIC CYLINDER D125X600 IS FOOT-CONTROLLED AT

BOTH SIDES OF THE TABLE. LEVERAGE RAISES THE TABLE TOP TO A MAXIMUM HEIGHT OF 1280mm AND

LOWERS IT TO 300 mm.

THE PARTICLE BOARD TABLE TOP IS COVERED WITH HIGH-QUALITY FITTED CARPET AND FURNISHED WITH

STAINLESS STEEL SLIDE BLOCKS WHICH HELP TO MOVE FURNITURE PIECES ON THE TABLE AS WELL AS

GROUNDING ELECTROSTATIC CHARGES. PREVENTION OF ELECTROSTATIC CHARGES AVOIDS THE

OCCURRENCE OF SPARKS AND FIRE.

6. LIFTING TABLE FOR UPHOLSTERY ST-3/K WITH HYDRAULIC BRAKE SYSTEM

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR UPHOLSTERED FURNITURE

MANUFACTURING.

– THE HEIGHT OF THE LIFTING TABLE CAN BE QUICK ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, SERVO-MOTOR, AND AN AUTOMATIC DRIVE;

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES;

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP);

– THE TABLE HAS A DRAWER FOR STORAGE BASIC UPHOLSTERY TOOLS.

MAIN ADVANTAGES OF THE LIFTING TABLE FOR UPHOLSTERY:

– HYDRAULIC BRAKE SYSTEM FOR TABLE STABILIZATION;

– INCREASES QUALITY OF THE FURNITURE;

– INCREASES WORKER’S COMFORT (IT WON’T BE NECESSARY FOR WORKER TO WORK ON KNEES TO

UPHOLSTER UNDER THE FURNITURE);

– TAKES THE LOAD OFF THE EMPLOYEE’S SPINE;

– VERY RELIABLE AND STABLE STRUCTURE IS MADE OF STEEL PROFILES;

– TESTED AND APPROVED BY THE LEADING POLISH AND FOREIGN FURNITURE MANUFACTURERS;

– INCREASES PRODUCTIVITY OF MANUFACTURING;

SPECIFICATIONS:

MAXIMUM LIFTING HEIGHT: 1280 mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300 mm
MAXIMUM LIFTING CAPACITY: 170 KG
WORKING PRESSURE: 6 BAR
LIFTING SPEED: 15 CM/S
DROPPING SPEED: 15 CM/S
OCCUPIED SURFACE OF THE BASIS: 700×1850 mm
WEIGHT: 160 KG

7. LIFTING TABLE FOR UPHOLSTERY ST-3/R WITH CARPET COVERED TABLETOP AND ARMS

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE.

FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR UPHOLSTERED FURNITURE MANUFACTURING.

– THE HEIGHT OF THE LIFTING TABLE CAN BE QUICK ADJUSTED DURING THE MANUFACTURING PROCESS.

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, SERVO-MOTOR, AND AN AUTOMATIC DRIVE.

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE.

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES.

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP).

– THE TABLE HAS A DRAWER FOR STORAGE BASIC UPHOLSTERY TOOLS.

MAIN ADVANTAGES OF THE LIFTING TABLE FOR UPHOLSTERY:

– INCREASES PRODUCTIVITY OF MANUFACTURING.

– INCREASES QUALITY OF THE FURNITURE.

– INCREASES WORKER’S COMFORT (IT WON’T BE NECESSARY FOR WORKER TO WORK ON KNEES TO

UPHOLSTER UNDER THE FURNITURE).

– TAKES THE LOAD OFF THE EMPLOYEE’S SPINE.

– VERY RELIABLE AND STABLE STRUCTURE IS MADE OF STEEL PROFILES.

– TESTED AND APPROVED BY THE LEADING POLISH AND FOREIGN FURNITURE MANUFACTURERS.

ACCESSORIES:

– STEEL TUBES FOR RAISING FURNITURE OVER THE TABLE FOR EASY ACCESS TO ITS BOTTOM PART.

– CARPET COVERED TABLETOP.

SPECIFICATIONS:
TABLETOP DIMENSIONS: 940×1940 mm
MAXIMUM LIFTING HEIGHT: 1280 mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300 mm
MAXIMUM LIFTING CAPACITY: 130 KG
WORKING PRESSURE: 6 BAR
LIFTING SPEED: 15 CM/S
DROPPING SPEED: 15 CM/S
OCCUPIED SURFACE OF THE BASIS: 700×1850 mm

WEIGHT: 150 KG

8. LIFTING TABLE FOR UPHOLSTERY ST-3 MINI (ST-3/R MINI)

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE.

LIFTING TABLE WITH PNEUMATIC DRIVE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR

MANUFACTURING OF UPHOLSTERED FURNITURE.

– THE HEIGHT OF THE LIFTING TABLE CAN BE ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, PNEUMATIC CYLINDER, AND AN AUTOMATIC DRIVE;

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF,

THE TABLE TOP WILL NOT DROP);

– THE TABLE HAS A DRAWER FOR STORING BASIC UPHOLSTERY TOOLS.

– ADDITIONAL EQUIPMENT: ARMS FOR RAISING FURNITURE PIECES.

THE TABLE STRUCTURE IS MADE OF STEEL. THE PNEUMATIC CYLINDER D125X600 IS FOOT-CONTROLLED AT

BOTH SIDES OF THE TABLE. LEVERAGE RAISES THE TABLE TOP TO A MAXIMUM HEIGHT OF 1280 MM AND

LOWERS IT TO 300 MM. THE PARTICLE BOARD TABLE TOP IS COVERED WITH HIGH-QUALITY FITTED CARPET

AND FURNISHED WITH STAINLESS STEEL SLIDE BLOCKS WHICH HELP TO MOVE FURNITURE PIECES ON THE

TABLE AS WELL AS GROUNDING ELECTROSTATIC CHARGES. PREVENTION OF ELECTROSTATIC CHARGES

AVOIDS THE OCCURRENCE OF SPARKS AND FIRE.

SPECIFICATIONS:

TABLETOP DIMENSIONS: 850 X 1600mm
MAXIMUM LIFTING HEIGHT: 1045mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 260mm
MAXIMUM LIFTING CAPACITY: 130 KG
WORKING PRESSURE: 6 BAR
LIFTING SPEED 15 CM/S
DROPPING SPEED: 15 CM/S
OCCUPIED SURFACE OF THE BASIS: 700 X 1420mm

9. LIFTING TABLE FOR UPHOLSTERY ST-5

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR UPHOLSTERED FURNITURE

MANUFACTURING.

– THE HEIGHT OF THE LIFTING TABLE CAN BE QUICK ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME AND PNEUMATIC CYLINDER;

– THE CYLINDER IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES;

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF, THE TABLE TOP WILL NOT DROP);

MAIN ADVANTAGES OF THE LIFTING TABLE FOR UPHOLSTERY:

– INCREASES PRODUCTIVITY OF MANUFACTURING;

– INCREASES QUALITY OF THE FURNITURE;

– INCREASES WORKER’S COMFORT (IT WON’T BE NECESSARY FOR WORKER TO WORK ON KNEES TO

UPHOLSTER UNDER THE FURNITURE);

– TAKES THE LOAD OFF THE EMPLOYEE’S SPINE;

– VERY RELIABLE AND STABLE STRUCTURE IS MADE OF STEEL PROFILES;

– TESTED AND APPROVED BY THE LEADING POLISH AND FOREIGN FURNITURE MANUFACTURERS;

SPECIFICATIONS:

MAXIMUM LIFTING HEIGHT: 1250 mm

MINIMUM HEIGHT WITH TABLE TOP DROPPED: 600 mm

MAXIMUM LIFTING CAPACITY: 100 kg

WORKING PRESSURE: 6 BAR

LIFTING SPEED: 15 CM/S

OCCUPIED SURFACE OF THE BASIS: 700×900 mm

WEIGHT: 100 KG

10. LIFTING TABLE FOR UPHOLSTERY ST-2/OK

PNEUMATIC TURNTABLE ST2/OK IS DESIGNED FOR GLUING, ASSEMBLING, PACKING, UPHOLSTERING OF THE

FURNITURE OR TEXTILE MATERIALS. IT IS ALSO PERFECT FOR CUTTING OF THE LEATHER. TABLETOP IS MADE

OF 25mm THICK CHIPBOARD AND COATED WITH 10mm PE (WHITE POLYETHYLENE), STEEL PROFILES OF THE

TABLE ARE POWDER COATED. TABLE IS PEDAL CONTROLLED.

SPECIFICATIONS:

TABLETOP DIMENSIONS: 1000 x 2000 mm

MAXIMUM HEIGHT: 850 mm

MINIMUM HEIGHT: 450 mm

PNEUMATIC CYLINDER: D125X300

OCCUPIED SURFACE OF THE BASIS: 950х950 mm

AIR CONSUMPTION FOR 1 CYCLE: 50 L

11. PNEUMATIC TURNTABLE ST-4

OUR LONG EXPERIENCE IN MANUFACTURING PNEUMATIC LIFTING TABLES AND CLOSE COOPERATION WITH THE

POLISH LARGEST MANUFACTURER OF UPHOLSTERED FURNITURE ALLOWED US TO CREATE THE PERFECT

TABLE FOR GLUING FURNITURE.

THE PNEUMATIC TURNTABLE ST-4 IS DESIGNED FOR GLUING, ASSEMBLY, PACKAGING FURNITURE AND ITS

COMPONENTS.

THE WHOLE CONSTRUCTION IS MADE OF A CLOSED STEEL PROFILES ENSURING PROPER DURABILITY AND

STIFFNESS. STEEL POWDER COATING ADDS AN ELEGANT LOOK OF THE WHOLE CONSTRUCTION. THE WORK-

TOP MADE OF 18mm THICK COATED BOARD AND COVERED WITH 2mm THICK STAINLESS STEEL. THE WORK

TOP STRENGTHENED WITH FOUR STABILIZERS AT THE BEARINGS.

THE WHOLE MECHANISM, INCLUDING PNEUMATICS, PROTECTED BY A STEEL FOLDING CURTAIN 1.5mm THICK,

WHICH IS POWDER COATED TOO. PNEUMATIC ELEMENTS ARE HIDDEN INSIDE THE TABLE ON A SPECIAL SLIDER

THAT PREVENTS CONTAMINATION OF THE MECHANISM AND PNEUMATIC DETAILS WHILE GLUING FURNITURE.

MAIN ADVANTAGES:

– WORK TOP COVERED WITH STAINLESS STEEL REMAINS CLEAN A LONG TIME;

– STEEL COVER PROVIDES A DURABLE AND RELIABLE PERFORMANCE OF THE MECHANISM;

– STEEL TUBES ON THE TABLE TOP PROVIDE A MINIMAL CONTACT OF FURNITURE WITH THE TABLE SURFACE;

– TABLE IS MANUFACTURED BY POLISH PRODUCER WITH YEARS OF EXPERIENCE.

SPECIFICATIONS:

OCCUPIED SURFACE OF THE BASIS 700 x 700 mm
TURNTABLE WORKTOP: 1200 x750 mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 450 mm
MAXIMUM LIFTING HEIGHT: 820 mm
PNEUMATIC CYLINDER: D125 X 200
AIR CONSUMPTION A FULL CYCLE: 40 LITERS
MAXIMUM LIFTING CAPACITY: 160 KG
WEIGHT: 150 KG
TUBES ADJUSTMENT ON THE TABLE TOP: 600 TO 800 mm

12. PNEUMATIC TURNTABLE ST-3/O

USING THIS PNEUMATIC TABLE YOU CAN SIGNIFICANTLY IMPROVE BOTH PRODUCTIVITY AND THE QUALITY OF

FURNITURE.

LIFTING TABLE WITH PNEUMATIC DRIVE. FOR GENERAL USE IN THE UPHOLSTERY INDUSTRY, FOR

MANUFACTURING OF UPHOLSTERED FURNITURE.

– THE HEIGHT OF THE LIFTING TABLE CAN BE ADJUSTED DURING THE MANUFACTURING PROCESS;

– THE TABLE IS SUPPORTED WITH A STEEL FRAME, PNEUMATIC CYLINDER, AND AN AUTOMATIC DRIVE;

– THE AUTOMATIC DRIVE IS FOOT-CONTROLLED AT BOTH SIDES OF THE TABLE;

– THE TABLE HAS A CONNECTION (OUTPUT) FOR PNEUMATIC DEVICES

– AFTER THE TABLE IS CUT OFF FROM THE POWER SUPPLY, IT IS AUTOMATICALLY BLOCKED (IF THE POWER

SUPPLY IS CUT OFF,

THE TABLE TOP WILL NOT DROP

– THE TABLE HAS A DRAWER FOR STORING BASIC UPHOLSTERY TOOLS.

THE TABLE STRUCTURE IS MADE OF STEEL. THE PNEUMATIC CYLINDER D125X600 IS FOOT-CONTROLLED AT

BOTH

SIDES OF THE TABLE. LEVERAGE RAISES THE TABLE TOP TO A MAXIMUM HEIGHT OF 1280 mm AND LOWERS IT

TO 300 mm. TABLETOP IS SWIVEL, MADE OF HIGH QUALITY, WATER-RESISTANT NON-SLIP PLYWOOD.

SPECIFICATIONS:
TABLETOP DIMENSIONS: 940 x 1940 mm
MAXIMUM LIFTING HEIGHT: 1280 mm
MINIMUM HEIGHT WITH TABLE TOP DROPPED: 300 mm
MAXIMUM LIFTING CAPACITY: 160 KG
WORKING PRESSURE: 6 BAR
LIFTING SPEED: 15 CM/S
DROPPING SPEED: 15 CM/S
OCCUPIED SURFACE OF THE BASIS: 700 x 1850 mm
CYLINDER: D 125

13. PNEUMATIC PRESS FOR MATTRESSES PDM-1

PNEUMATIC PRESS FOR MATTRESSES IS DESIGNED FOR FURNITURE INDUSTRY. IT CAN BE USED IN

MANUFACTURING OF THE BIG PIECES OF UPHOLSTERED FURNITURE WITH SPRING MATTRESSES OR

UPHOLSTERY FOAM. IT GREATLY FACILITATES THE PRODUCTION OF SUCH VAST FURNITURE; IT PROVIDES

EVEN COMPRESSION OF SPRINGS OR FOAM RUBBER TO THE DESIRED THICKNESS OVER THE ENTIRE

SURFACE.

UPHOLSTERING OF A CLOTH IS CARRIED OUT BY ITS PRE-STRETCHING IT ON A MATTRESS, IT GIVES A GOOD

EFFECT – UPHOLSTERY CLOTH HAS SMOOTH SURFACE WITH NO VISIBLE WRINKLES.

ALSO, THERE IS A SIGNIFICANT TIME SAVING, BECAUSE THE WHOLE OPERATION CAN BE DONE BY ONE

PERSON, THE PRESS CONTINUES TO HOLD ELEMENTS OF THE FURNITURE IN THE SAME POSITION IN WHICH IT

WAS PLACED UNDER THE PRESS FOR THE UPHOLSTERY AND PROVIDES EASY ACCESS TO THE ENTIRE BACK

SIDE OF THE FURNITURE PIECE, WITHOUT THE NEED TO ROTATE IT.

THE POWER SUPPLY OF PNEUMATIC PRESS IS COMPRESSED AIR, SO YOU CAN USE YOUR EXISTING

NETWORK OF THE COMPRESSED AIR IN YOUR PRODUCTION SHOP. USING PNEUMATIC ACTUATOR WITH

TRAPEZOIDAL SCREW AND A HAND WHEEL ALLOW YOU TO ACCURATELY ADJUST THE DESIRED COMPRESSION

FORCE TO THE MATTRESS. PRESSING FORCE IS INDICATED ON THE OPERATING PRESSURE REGULATOR,

MOUNTED ON THE BODY OF THE PRESS.

SPECIFICATIONS:

WEIGHT: APPROX. 225 KG

WORKING PRESSURE: 0 TO 9 BAR

14. PNEUMATIC PRESS FOR OFFICE CHAIRS PDK-1

USING THIS PRESS YOU CAN SIGNIFICANTLY IMPROVE EFFICIENCY, PRODUCTIVITY AND QUALITY OF YOUR

CHAIR MANUFACTURING DEPARTMENT.

LONG STROKE OF THE PNEUMATIC CYLINDER AND LOWER TELESCOPIC STAND ALLOW ADJUSTING PRESS ON

NECESSARY, COMFORTABLE HEIGHT FOR THE OPERATOR. OUR PRESS IS A PERFECT MACHINE FOR

UPHOLSTERING OF OFFICE CHAIR SEATS OR BACKRESTS. THE CONTROL DEVICE WITH TWO-HAND SENSOR

ENSURES THE MACHINE’S TOTAL SAFETY. IT IS POSSIBLE TO ADJUST THE PRESSING FORCE USING AIR

PRESSURE REGULATOR. THE PRESS PROVIDES CONTROLLABLE AND EVEN PRESSING OF THE CHAIR SEATS

AND BACKRESTS (MATERIAL, UPHOLSTERY FOAM, CHIPBOARD), SO THERE IS NO NEED TO PULL THE

MATERIAL TO ENSURE ITS RIGHT TENSION.

PRESS IS EQUIPPED WITH TURNTABLE CUSHION THAT MAKES UPHOLSTERY NICE AND EASY. IT ALLOWS

WORKER TO TURN AND STAPLE A SEAT OR A BACKREST ALONG A CONTOUR.

SPECIFICATIONS:

OCCUPIED SURFACE OF THE BASIS: 80X105 CM

HEIGHT: 215 CM

WEIGHT: 110 KG

WORKING PRESSURE: 3 TO 6 BAR

15. PNEUMATIC PRESS FOR OFFICE CHAIRS PDP-1

USING THIS PRESS YOU CAN SIGNIFICANTLY IMPROVE EFFICIENCY, PRODUCTIVITY AND QUALITY OF YOUR

CHAIR MANUFACTURING DEPARTMENT.

LONG STROKE OF THE PNEUMATIC CYLINDER AND LOWER TELESCOPIC STAND ALLOW ADJUSTING PRESS ON

NECESSARY, COMFORTABLE HEIGHT FOR THE OPERATOR.

OUR PRESS IS PERFECT MACHINE FOR UPHOLSTERING OF OFFICE CHAIR SEATS OR BACKRESTS. THE

CONTROL DEVICE WITH TWO-HAND SENSOR ENSURES THE MACHINE’S TOTAL SAFETY. IT IS POSSIBLE TO

ADJUST THE PRESSING FORCE USING AIR PRESSURE REGULATOR. THE PRESS PROVIDES CONTROLLABLE

AND EVEN PRESSING OF THE CHAIR SEATS AND BACKRESTS (MATERIAL, UPHOLSTERY FOAM, CHIPBOARD),

SO THERE IS NO NEED TO PULL THE MATERIAL TO ENSURE ITS RIGHT TENSION.

PRESS IS EQUIPPED WITH TURNTABLE CUSHION THAT MAKES UPHOLSTERY NICE AND EASY. IT ALLOWS

WORKER TO TURN AND STAPLE A SEAT OR A BACKREST ALONG A CONTOUR. SPECIFICATIONS:

OCCUPIED SURFACE OF THE BASIS: 60X60 CM

HEIGHT: 90 CM

WEIGHT: 35 KG

WORKING PRESSURE: 3 TO 6 BAR

16. BAND KNIFE MACHINE R1250

BAND KNIFE MACHINE R1250 IT’S EASY TO USE AND HIGHLY PRODUCTIVE EQUIPMENT. IT HAS HIGH PRECISION

CUTTING OF TEXTILE MATERIALS (COTTON, KNITTED FABRICS, SYNTHETIC FABRICS, INSULATION, ETC.).

MULTIPLE LAYERS OF FABRIC CAN BE CUT BY REXEL R1250 (THICKNESS UP TO 200 MM, SOME INSULATION UP

TO 310 MM). MAXIMUM AND MINIMUM THICKNESS DEPENDS ON TYPE OF THE MATERIAL.

BAND KNIFE MACHINE CAN BE USED AS A STANDALONE WORKSTATION OR WITH A CUTTING TABLE SK-3.

BAND KNIFE MACHINE R1250 IS VERY EASY TO OPERATE AND IS EQUIPPED WITH A GRINDING DEVICE, WHICH

PROVIDES HIGH QUALITY SHARPENING WITH MINIMAL WEAR OF BAND KNIFE.

VARIABLE SPEED CONTROL ALLOWS YOU TO SET ANY APPROPRIATE SPEED FOR ALL TYPES OF MATERIALS.

R1250 IS EQUIPPED WITH THE SPECIAL DETECTOR (RESPONSIBLE FOR THE WORK OF BAND KNIFE BLADE)

AND THE BAND KNIFE SECURITY SYSTEM (PROTECTS BAND KNIFE BLADE FROM ESCAPE FROM THE COURSE).

MACHINE IS EQUIPPED WITH A LAMP WITH SEPARATE SWITCH. ALSO IT IS EQUIPPED WITH A MECHANICAL TAPE

CATCHER. THANK TO THIS SOLUTION WORKING WITH BAND KNIFE MACHINE BECOME TO BE SAFER. THE

BLOWING FROM TABLE TOP MAKES THE AIRSPACE UNDER CUTTING FABRIC WHAT FACILITATES THE

MANEUVERING OF IT. AIR CHANNELS ARE SUPPLY THE AIR FLOW ONLY TO THE PART WHERE THE MATERIAL

SITUATED. IT HELPS TO AVOID GETTING DUST AND SCRAPS OF MATERIAL IN AIR CHANNELS.

THE EQUIPMENT INCLUDES:

– AIR BLOWING TABLE TOP;

– VARIABLE SPEED CONTROL;

– BAND KNIFE SECURITY SYSTEM;

– THE LAMP;

– GRINDING DEVICE;

– ADDITIONAL OPTION: VACUUM CLEANER.

SPECIFICATIONS:

CUTTING CAPACITY: 200mm (MAXIMUM 310 mm )

TABLE SIZE: 2000X1800mm

POWER SUPPLY: 400 V/ 50 HZ

BAND LENGTH: 5240mm

ARM LENGTH: 1250mm

WATTAGE: 1.5 KW (2.2 KW OPTIONAL)

17. BAND KNIFE MACHINE R1150

IN ORDER TO MEET THE EXPECTATIONS OF OUR CUSTOMERS, WE HAVE CREATED AN EXCELLENT AND USEFUL

BAND KNIFE MACHINE R1150 THAT IS ABLE TO CUT UPHOLSTERY FOAM UP TO 500 MM THICK.

BAND KNIFE MACHINE R1150 IT’S EASY TO USE AND HIGHLY PRODUCTIVE EQUIPMENT. IT HAS HIGH PRECISION

CUTTING OF UPHOLSTERY FOAM AND TEXTILE MATERIALS (COTTON, KNITTED FABRICS, SYNTHETIC FABRICS,

INSULATION, ETC.). MULTIPLE LAYERS OF FABRIC CAN BE CUT BY R1150 (THICKNESS UP TO 300 MM,

UPHOLSTERY FOAM UP TO 500 MM). MAXIMUM AND MINIMUM THICKNESS DEPENDS ON TYPE OF THE

MATERIAL.

BAND KNIFE MACHINE R1150 IS VERY EASY TO OPERATE AND IT IS EQUIPPED WITH A SHARPENING DEVICE,

WHICH PROVIDES HIGH QUALITY SHARPENING WITH MINIMAL WEAR OF BAND KNIFE.

VARIABLE SPEED CONTROL ALLOWS ONE TO SET ANY APPROPRIATE SPEED FOR ALL TYPES OF MATERIALS.

R1150 IS EQUIPPED WITH THE SPECIAL DETECTOR (RESPONSIBLE FOR THE WORK OF BAND KNIFE) AND THE

BAND KNIFE SECURITY SYSTEM (PROTECTS BAND KNIFE BLADE FROM ESCAPE FROM THE COURSE).

MACHINE IS EQUIPPED WITH A LAMP WITH SEPARATE SWITCH. ALSO IT IS EQUIPPED WITH A MECHANICAL TAPE

CATCHER. THANK TO THIS SOLUTION WORKING WITH BAND KNIFE MACHINE BECOME TO BE SAFER. CONTROL

OF THE BAND KNIFE MACHINE R1150 IS CARRIED OUT BY THE TOUCH SCREEN.

THE BLOWING FROM TABLE TOP MAKES THE AIRSPACE UNDER THE FABRIC WHAT FACILITATES THE

MANEUVERING OF IT. AIR CHANNELS ARE SUPPLY THE AIR FLOW ONLY TO THE PART WHERE THE MATERIAL

SITUATED. IT HELPS TO AVOID GETTING DUST AND SCRAPS OF MATERIAL INTO THE AIR CHANNELS.

R1150 BAND KNIFE MACHINE CAN BE ALSO EQUIPPED WITH A VACUUM CLEANER SYSTEM WHICH REMOVES

DUST, SCRAPS AND FRAGMENTS OF MATERIAL.

ANOTHER USEFUL AND IMPORTANT ACCESSORY IS A MEASURING DEVICE FOR FAST AND PRECISE DEPTH

ADJUSTING OF THE FURNITURE FOAM THAT ARE ABOUT TO CUT.

THE EQUIPMENT INCLUDES:

– CONTROL: TOUCH-SCREEN;

– AIR BLOWING TABLE TOP;

– VARIABLE SPEED CONTROL;

– BAND KNIFE SECURITY SYSTEM;

– THE LAMP;

– GRINDING DEVICE;

– ADDITIONAL OPTION: VACUUM CLEANER;

– ADDITIONAL OPTION: DEPTH CUTTING METER.

SPECIFICATIONS:

CUTTING CAPACITY: UP TO 500 mm

ARM LENGTH: 1150 mm

BAND LENGTH: 5240 mm

TABLE SIZE: 2200 x 1800 mm

POWER SUPPLY: 400 V / 50 Hz

WATTAGE: 2,2 KW

18. BAND KNIFE MACHINE R1000 WITH AIR BLOWING AND VARIABLE SPEED CONTROL

BAND KNIFE MACHINE R1000 IT’S EASY TO USE AND HIGHLY PRODUCTIVE EQUIPMENT. IT HAS HIGH PRECISION

CUTTING OF TEXTILE MATERIALS (COTTON, KNITTED FABRICS, SYNTHETIC FABRICS, INSULATION, ETC.).

MULTIPLE LAYERS OF FABRIC CAN BE CUT BY R1000 (THICKNESS UP TO 200mm, SOME INSULATION UP TO

300mm). MAXIMUM AND MINIMUM THICKNESS DEPENDS ON TYPE OF THE MATERIAL.

BAND KNIFE MACHINE CAN BE USED AS A STANDALONE WORKSTATION OR WITH A CUTTING TABLE SK-3.

BAND KNIFE MACHINE R1000 IS VERY EASY TO OPERATE AND IS EQUIPPED WITH A GRINDING DEVICE, WHICH

PROVIDES HIGH QUALITY SHARPENING WITH MINIMAL WEAR OF BAND KNIFE.

VARIABLE SPEED CONTROL ALLOWS YOU TO SET ANY APPROPRIATE SPEED FOR ALL TYPES OF MATERIALS.

R1000 IS EQUIPPED WITH THE SPECIAL DETECTOR (RESPONSIBLE FOR THE WORK OF BAND KNIFE BLADE)

AND THE BAND KNIFE SECURITY SYSTEM (PROTECTS BAND KNIFE BLADE FROM ESCAPE FROM THE COURSE).

MACHINE IS EQUIPPED WITH A LAMP WITH SEPARATE SWITCH. ALSO IT IS EQUIPPED WITH A MECHANICAL TAPE

CATCHER. THANK TO THIS SOLUTION WORKING WITH BAND KNIFE MACHINE BECOME TO BE SAFER. THE

BLOWING FROM TABLE TOP MAKES THE AIRSPACE UNDER CUTTING FABRIC WHAT FACILITATES THE

MANEUVERING OF IT. AIR CHANNELS ARE SUPPLY THE AIR FLOW ONLY TO THE PART WHERE THE MATERIAL

SITUATED. IT HELPS TO AVOID GETTING DUST AND SCRAPS OF MATERIAL IN AIR CHANNELS.

THE EQUIPMENT INCLUDES:

– AIR BLOWING TABLE TOP;

– VARIABLE SPEED CONTROL;

– BAND KNIFE SECURITY SYSTEM;

– THE LAMP;

– GRINDING DEVICE;

– ADDITIONAL OPTION: VACUUM CLEANER.

SPECIFICATIONS:

CUTTING CAPACITY: 200 mm (MAXIMUM 300 mm )
TABLE SIZE: 1800 x 1800 mm
POWER SUPPLY: 400 V/ 50 HZ
BAND LENGTH: 4250 mm
ARM LENGTH: 1000 mm
WATTAGE: 1.5 KW

19. BAND KNIFE MACHINE R750 WITH AIR BLOWING AND VARIABLE SPEED CONTROL.

BAND KNIFE MACHINE R750 IT’S EASY TO USE AND HIGHLY PRODUCTIVE EQUIPMENT. IT HAS HIGH PRECISION

CUTTING OF TEXTILE MATERIALS (COTTON, KNITTED FABRICS, SYNTHETIC FABRICS, INSULATION, ETC.).

MULTIPLE LAYERS OF FABRIC CAN BE CUT BY R750 (THICKNESS UP TO 200 mm, SOME INSULATION UP TO 300

mm). MAXIMUM AND MINIMUM THICKNESS DEPENDS ON TYPE OF THE MATERIAL.

BAND KNIFE MACHINE CAN BE USED AS A STANDALONE WORKSTATION OR WITH A CUTTING TABLE SK-3.

BAND KNIFE MACHINE R750 IS VERY EASY TO OPERATE AND IS EQUIPPED WITH A GRINDING DEVICE, WHICH

PROVIDES HIGH QUALITY SHARPENING WITH MINIMAL WEAR OF BAND KNIFE.

VARIABLE SPEED CONTROL ALLOWS YOU TO SET ANY APPROPRIATE SPEED FOR ALL TYPES OF MATERIALS.

R750 IS EQUIPPED WITH THE SPECIAL DETECTOR (RESPONSIBLE FOR THE WORK OF BAND KNIFE BLADE) AND

THE BAND KNIFE SECURITY SYSTEM (PROTECTS BAND KNIFE BLADE FROM ESCAPE FROM THE COURSE).

MACHINE IS EQUIPPED WITH A LAMP WITH SEPARATE SWITCH. ALSO IT IS EQUIPPED WITH A MECHANICAL TAPE

CATCHER. THANK TO THIS SOLUTION WORKING WITH BAND KNIFE MACHINE BECOME TO BE SAFER.

THE BLOWING FROM TABLE TOP MAKES THE AIRSPACE UNDER CUTTING FABRIC WHAT FACILITATES THE

MANEUVERING OF IT. AIR CHANNELS ARE SUPPLY THE AIR FLOW ONLY TO THE PART WHERE THE MATERIAL

SITUATED. IT HELPS TO AVOID GETTING DUST AND SCRAPS OF MATERIAL IN AIR CHANNELS.

THE EQUIPMENT INCLUDES:

AIR BLOWING TABLE TOP;
VARIABLE SPEED CONTROL;
BAND KNIFE SECURITY SYSTEM;
LAMP;
GRINDING DEVICE;
ADDITIONAL OPTION: VACUUM CLEANER.

SPECIFICATIONS:
CUTTING CAPACITY: 200mm (MAXIMUM 300mm)
TABLE SIZE: 1500 X 1500mm
BAND LENGTH: 3800 mm
ARM LENGTH: 750mm
POWER SUPPLY: 400 V/ 50
WATTAGE: 1.5 KW

20. BAND KNIFE MACHINE R500

BAND KNIFE MACHINE R500 IT’S EASY TO USE AND HIGHLY PRODUCTIVE EQUIPMENT. IT HAS HIGH PRECISION

CUTTING OF TEXTILE MATERIALS (COTTON, KNITTED FABRICS, SYNTHETIC FABRICS, INSULATION, ETC.).

MULTIPLE LAYERS OF FABRIC CAN BE CUT BY R500 THICKNESS UP TO 300mm.

BAND KNIFE MACHINE CAN BE USED AS A STANDALONE WORKSTATION OR WITH A CUTTING TABLE SK-3.

BAND KNIFE MACHINE R500 IS VERY EASY TO OPERATE AND IS EQUIPPED WITH A GRINDING DEVICE, WHICH

PROVIDES HIGH QUALITY SHARPENING WITH MINIMAL WEAR OF BAND KNIFE.

SEVERAL MICROSWITCHES WILL PREVENT STARTING OF CUTTING MACHINE, IF A COVER IS OPEN OR THE

BAND IS NOT TIGHTENED. BROKEN BAND OR ITS WRONG TENSION AUTOMATICALLY TURNS OFF MACHINE.

MACHINE IS EQUIPPED WITH A LAMP WITH SEPARATE SWITCH.

ALSO MACHINE IS EQUIPPED WITH A MECHANICAL BAND CATCHER THAT MAKES THE BAND FIXED IN CASE OF

BREAK. THANK TO THIS SOLUTION WORKING WITH BAND KNIFE MACHINE BECOME TO BE MORE SAFE.

THE EQUIPMENT INCLUDES:

– MECHANICAL BAND CATCHER;

– LAMP;

– SHARPENING DEVICE;

SPECIFICATIONS:

MAXIMUM CUTTING CAPACITY: 300mm
GAP BETWEEN KNIFE AND BODY: 500mm
LENGTH OF BAND KNIFE: 2825mm
TABLE DIMENSION: 1000 X 1200mm
POWER SUPPLY: 400 V / 50 HZ
WATTAGE: 1,1 KW

21. MANUAL POSITIONER PR-3 FOR BAND KNIFE MACHINE R1150

MANUAL MEASURING DEVICE PR-3 IS THE PERFECT COMPLEMENT TO FOR REXEL BAND KNIFE MACHINES.

THIS DEVICE ALLOWS QUICK AND PRECISE ADJUSTMENT OF THE CUTTING SIZE OF UPHOLSTERY FOAM. THE

SETTINGS FOR THE MEASURE CAN BE CHANGED EASILY AND RELIABLE RUNNING OVER THE TABLETOP. THE

SYSTEM IS EQUIPPED WITH A MANUAL LOCK SETTING POSITION, WHICH ENSURES STABLE AND PRECISE

WORK WHILE CUTTING THE FOAM. THE POSITION IS READ BY MEASURE ON THE SURFACE OF THE TABLE.

HANDLES ON THE SIDES OF THE MEASURING DEVICE ALLOW CONVENIENT MOVING OVER THE TABLETOP. THE

DEVICE ADDITIONALLY MAY BE MADE IN DIFFERENT COLORS AND DIMENSIONS.

SPECIFICATION:

WIDTH OF THE MEASURE: 1843mm

LENGTH OF THE GUIDEWAY: 1040mm

HEIGHT OF BUMPER: 300mm

GUIDEWAY: PROFILE RAIL / TROLLEY WITH BALL BEARING

BLOCKADE: HOLDFAST WITH THE KNEE KOINT

FRAME: MADE OF ALUMINUM PROFILES

22. SPREADING MACHINE UL-3 ANY LENGTH

SPREADING MACHINE UL-3 IS A VERY SIMPLE AND EFFECTIVE SYSTEM FOR FABRIC SPREADING IN

COMPARISON WITH ALL OTHER POSSIBLE TECHNOLOGIES.

EQUIPMENT INCLUDES:

– THE CUTTING TABLE CONSTRUCTION WITH FLUENT HEIGHT REGULATION;

– THE TABLE WITH ALUMINUM EDGES. WIDTH OF TABLE MAY BE CUSTOMIZED TO CLIENT’S SPECIFICATIONS;

– THE UNWINDING TROLLEY;

– THE CLAMPING LINE;

– THE END CUTTER WITH LAYER COUNTER.

THE KNIFE MOUNTED ON THE CUTTING TABLE IS DESIGNED FOR CUTTING FABRIC PIECES TO IDENTICAL

LENGTHS AND STACKING THEM ONE-ON-ANOTHER FAST AND EASY.

SK-3 CUTTING TABLE IS BASIC CUTTING ROOM EQUIPMENT IN TAILORS’ AND UPHOLSTERERS’ SHOPS. THE

MODERN AND REVAMPED CONSTRUCTION WAS PRESENTED FOR THE FIRST TIME AT THE “INTERMASZ” FAIR,

MARCH 2008.

THE WHOLE CONSTRUCTION IS MADE OF A CLOSED STEEL FRAME ENSURING PROPER DURABILITY AND

STIFFNESS. THE WORK-TOP MADE OF 25mm THICK COATED BOARD WITH EDGES FINISHED WITH ALUMINUM

ANGLES ALSO GUARANTEES LONG- LASTING DURABILITY. STEEL POWDER COATING ADDS TO THE ELEGANT

LOOK OF THE WHOLE CONSTRUCTION. THE SK-3 CUTTING TABLE CONSISTS OF MODULES AND CAN THUS BE

QUICKLY AND EASILY EXTENDED AT ANY TIME. YOU CAN ALSO ADJUST THE TABLE HEIGHT (TO SOME EXTENT)

AND LEVEL IT USING ADJUSTING SCREWS. THE UL-3 SPREADING MACHINE IS OPTIONALLY INTEGRATED INTO

THE SK-3 CUTTING TABLE AND IS USED FOR MULTI-LAYER FABRIC SPREADING ON THE WORK-TOP. AFTER THE

FABRIC REEL IS FOLDED, THE MACHINE CAN BE OPERATED BY ONE PERSON. WITH AN IN-BUILT FABRIC END

CUTTER, EVERY UNFOLDED FABRIC LAYER CAN BE AUTOMATICALLY CUT OFF. THE SK-3 TABLE WITH THE UL-3

SPREADING MACHINE GREATLY FACILITATES EVERYDAY WORKFLOW IN A CUTTING ROOM AND IMPROVES ITS

PERFORMANCE WITHOUT THE NEED TO EMPLOY MORE STAFF.

23. CUTTING TABLE FOR ROLLER BLINDS US-1

CUTTING TABLE US-1 IS A MODERN, POWERFUL AND PROFESSIONAL PIECE OF EQUIPMENT FOR ROLLER

BLINDS MANUFACTURING.

MAIN ADVANTAGES OF THE TABLE:

– DEPENDING ON THE NEEDS, REMOVABLE KNIFE HEADS CAN CUT FABRIC BY ULTRASONIC OR MECHANICAL

ROUND KNIFE.

– TOUCH SCREEN PANEL PROVIDES EASY AND INTUITIVE CONTROL, SUPPORTING LANGUAGES: POLISH,

ENGLISH AND RUSSIAN.

– FULLY AUTOMATIC CUTTING PROCESS.

– PNEUMATIC CLAMPING LINE PROVIDES EVEN FABRIC PRESSURE FROM THE BOTH SIDES OF THE TABLE.

– KNIFE MOVING LENGTH DURING THE CUTTING MAY BE LIMITED BY THE WIDTH OF THE MATERIAL, THANKS TO

THE MATERIAL SENSOR.

– BIG ILLUMINATION SCREEN (260mm WIDTH) IS SITUATED BETWEEN THE CUTTING LINE AND MATERIAL FEED

DEVICE.

– PRECISE LENGTH AND ANGLE MEASURING DEVICE IS DESIGNED TO REGULATE ANGLES AND LENGTH OF THE

REQUIRED FABRIC PIECE.

– MASSIVE AND STRONG TABLE CONSTRUCTION IS MADE OF POWDER COATED STEEL PROFILES.

– IT IS POSSIBLE TO ADJUST HEIGHT OF THE TABLE USING ADJUSTMENT SCREWS IN THE LEGS OF THE TABLE.

– THE TABLE CONSISTS OF THE TWO PIECES: CUTTING MODULE ITSELF AND THE POST CUTTING MODULE.

THERE IS A POSSIBILITY OF PURCHASING ONLY CUTTING MODULE AND USING IT WITH THE OWN CUTTING

TABLE.

SPECIFICATIONS:

TOTAL POWER ~ 900 W
POWER SUPPLY 230V/50HZ
CLAMPING LINE WORKING PRESSURE 4 – 5 BAR
ULTRASONIC KNIFE MOVING SPEED ~ 0,5 M/S
ROUND KNIFE MOVING SPEED ~ 0,6 M/S
ROUND KNIFE SPEED 2500 RPM
KNIFE REPLACING TIME ~ 1 – 2 MINUTES

24. CUTTING TABLE FOR ROLLER BLINDS UK-1 MAX

MAXIMUM CUTTING LENGTH: 2500mm

THE EQUIPMENT INCLUDES:

– CUTTING TABLE LENGTH 3300mm, WIDTH 2770mm;

– END CUTTER KNIFE;

– PNEUMATIC CLAMPING LINE;

– MATERIAL FEED DEVICE.

ON THIS TABLE YOU CAN CUT:

– FABRIC FOR THE PRODUCTION OF ROLLER BLINDS;

– DIFFERENT SOLID, THICK TISSUES, FELT;

– ALL KINDS OF TEXTILE PRODUCTS: CARPETS, RUGS, RUNNERS, MATS, FLOOR COVERINGS.

CUTTING TABLE FOR ROLLER BLINDS CONSISTS OF VERY RIGID STEEL STRUCTURES MADE OF CLOSED STEEL

PROFILES. THE WORKING TABLE TOP IS MADE OF LAMINATED 25mm CHIPBOARD. THE TABLE IS PROTECTED

BY WHITE POWDER COATED ALUMINUM EDGES ON THE PERIMETER. WITH THE HELP OF SPECIAL SCREWS

YOU CAN ADJUST THE HEIGHT OF THE TABLE AND ALIGN THE TABLE HORIZONTALLY. THE CROSS-CUTTING KNIFE

ATTACHED TO THE WORKING TABLE TOP. THE ADVANTAGE OF THIS END CUTTER IS THAT THROUGH THE THICK

MATERIAL CUTTING IS JUST A THIN BLADE, NOT THE LEG OF CUTTING KNIFE.

PAY ATTENTION TO THE ENERGY CONSUMPTION OF THIS MACHINE: THE MOTOR THAT DRIVES THE CIRCULAR

BLADE IS USED FOR MOVING THE END CUTTER DEVICE ON THE GUIDE (1 MOTOR PERFORMS TWO

FUNCTIONS).

ANOTHER ADVANTAGE IS THE ABSENCE OF IDLE, (PROCESS OF CUTTING TAKES PLACE IN TWO DIRECTIONS).

PRESSING A BUTTON EMERGENCY STOP ON THE CONTROL BOX AT ANY TIME YOU CAN STOP END CUTTER E.G.

TO CHANGE THE DIRECTION AND CONTINUE CUTTING.

THE EQUIPMENT INCLUDES PNEUMATIC CLAMPING LINE, WHICH WILL PROVIDE A STRONG AND STABLE PINNING

THE CUT MATERIAL. YOU CAN ADJUST THE CLAMPING LINE BY USING THE JOYSTICK. WORKING AIR PRESSURE

FOR THE CLAMPING LINE IS 3-5 ATMOSPHERES.

25. CUTTING TABLE FOR ROLLER BLINDS UK-1 ECO

CUTTING TABLE REXEL UK-1 ЕСО IS DESIGNED FOR CUTTING ROLLER BLINDS.

THE EQUIPMENT INCLUDES:

– SPECIAL CUTTING TABLE WITH SMOOTH TABLETOP;

– PNEUMATIC CLAMPING LINE;

– END-CUTTING KNIFE;

– MATERIAL FEED DEVICE;

– MEASURING DEVICE.

THE TABLE HAS A MASSIVE STEEL STRUCTURE THAT PREVENTS ANY VIBRATIONS OR DEFORMATIONS DURING

THE OPERATION. AS AN OPTION IT IS POSSIBLE TO PRODUCE ANY SIZE ILLUMINATED TABLE TOP. MAXIMUM

CUTTING LENGTH IS 2.5 M. KNIFE OPERATION IS CARRIED OUT FROM THE CONTROL BOX, LIFTING AND

LOWERING OF THE CLAMPING LINE BY THE LEVER. CONSTANT BLADE SPEED IS 0.5 M/S AND THERE IS NO

POSSIBILITY OF INSTALLING AN ULTRASONIC KNIFE AT THIS TABLE.

SPECIFICATIONS:

CUTTING WIDTH: 2500 mm
TABLE WIDTH: 2700 mm
TABLE LENGTH: 2500 mm or more
OVERALL TABLE WIDTH: 3100 mm
OVERALL TABLE LENGTH: 2900 mm
TABLE HEIGHT: 890mm
BLADE SPEED: 0,5 M/S
KNIFE ROTATION SPEED: 2300 RPM
BLADE DIAMETER: 108 mm
POWER: 230 V
WATTAGE: 240 W

ATTENTION! THIS EQUIPMENT IS NOT AVAILABLE AT ONCE. IT MAY BE ORDERED AFTER A THOROUGH

DISCUSSION OF THE CUSTOMER’S NEEDS. TIME OF PRODUCTION OF THE TABLE IS 7-10 DAYS.

26. END CUTTER OT-3 FOR SOLID AND HEAVY MATERIALS

THE END CUTTER OT-3 IS INTENDED FOR CUTTING SOLID AND HEAVY MATERIALS AND IS WIDELY USED FOR

CUTTING THE MATERIAL DURING THE ROLLER BLINDS, INDOOR BLINDS MANUFACTURING. THE ADVANTAGE OF

THIS CUTTING TABLE IS THAT THROUGH THE THICK MATERIAL GOES JUST A THIN BLADE, NOT THE LEG OF

CUTTING KNIFE.

PAY ATTENTION TO THE ENERGY CONSUMPTION OF THIS MACHINE: THE MOTOR THAT DRIVES THE CIRCULAR

BLADE IS USED FOR MOVING THE CUT-OFF DEVICE ON GUIDE (1 MOTOR PERFORMS TWO FUNCTIONS).

ANOTHER ADVANTAGE IS THE ABSENCE OF IDLE (PROCESS OF CUTTING TAKES PLACE IN TWO DIRECTIONS).

PRESSING A BUTTON ON THE CONTROL BOX AT ANY TIME YOU CAN STOP END CUTTER E.G. TO CHANGE THE

DIRECTION AND CONTINUE CUTTING.

THE KIT INCLUDES PNEUMATIC CLAMPING LINE, WHICH WILL PROVIDE A STRONG AND STABLE PINNING OF THE

MATERIAL. YOU CAN ADJUST THE CLAMPING LINE BY USING THE JOYSTICK. WORKING AIR PRESSURE FOR THE

CLAMPING LINE IS 3-5 ATMOSPHERES.

IS SUPPLIED IN A WOODEN BOX THAT PROVIDES RELIABLE PROTECTION THE EQUIPMENT DURING

TRANSPORTATION.

SPECIFICATIONS:

VOLTAGE: 3-PHASE/380V
WATTAGE: 250 W
MATERIAL THICKNESS: UP TO 20 CM
MATERIAL WIDTH: UP TO 220 CM
KNIFE ROTATION SPEED: 1350-1450 RPM
THE KNIFE MOVEMENT SPEED: 0.5 M / S
THE DIAMETER OF THE BLADE: 125 mm

27. ROLLER BLIND FABRIC WINDING UNIT ZT-1

WE OFFER THE PERFECT DEVICE FOR THE FABRIC WINDING DURING THE MANUFACTURING ROLLER BLINDS,

INDOOR BLINDS. THIS DEVICE ALLOWS WINDING THE FABRIC ON THE TUBE IN MUCH FASTER AND MORE

ACCURATE WAY UNLIKE TO MANUAL WINDING.

MAIN ADVANTAGES OF ZT-1

– FAST AND SIMPLE INSTALLATION AND REMOVAL OF A ROLLER BLIND TUBE WITH THE FABRIC AFTER WINDING;

– FABRIC WINDING UNIT CAN BE USED WITH A CUTTING TABLE FOR ROLLER BLINDS UK-1MAX, OR WITH ANY

OTHER.

– DEVICE IS FOOT-CONTROLLED;

– VARIABLE SPEED CONTROL;

– SUITABLE FOR MOST ROLLER BLIND TUBES;

– INTUITIVE MACHINE OPERATION.

SPECIFICATIONS:

WATTAGE: 120 W

VOLTAGE: 230 V

TUBE DIAMETER: UP TO 40mm

TUBE LENGTH: UP TO 2650mm

ROLLING MACHINE LENGTH: 3000mm

ON CLIENT’S ORDER WE WILL PRODUCE ROLLER BLIND FABRIC WINDING UNIT ZT-1 WITH REQUIRED

SPECIFICATIONS.

28. AUTOMATIC MEASURING STOP PA-1-3

AN AUTOMATIC MEASURING STOP IS DESIGNED FOR CUTTING ANY PROFILES MADE OF ALUMINUM.

THIS MACHINE IS EQUIPPED WITH A STOP, WHICH IS AUTOMATICALLY SETS TO THE SPECIFIED POSITION AFTER

ENTERING THE REQUIRED LENGTH OF THE CUT PROFILE OF THE ON THE TOUCH SCREEN. THE END OF THE

PROFILE SHOULD BE MOVED ALL THE WAY TO THE STOP AND AFTER THAT A SEGMENT CAN BE CUT. THIS

EQUIPMENT PROVIDES FAST AND ACCURATE POSITIONING.

SPECIFICATIONS:

– IT IS POSSIBLE TO INSTALL VARIOUS CUTTING EQUIPMENT (SAWS AND CUTTERS FOR ALUMINUM, STEEL,

WOOD, PVC) THE STANDARD VERSION IS EQUIPPED WITH AN ALUMINUM CIRCULAR SAW;

– ONE CAN ADJUST STOP MANUALLY;

– THE MAXIMUM DEFAULT LENGTH IS 3000mm IN THE PA-1-3 VERSION. EXTENDED VERSIONS MAY BE ORDERED

WITH THE 4000mm, 5000mm OR 6000mm LENGTHS;

– THE RAIL GUIDE IS TOUCH PROTECTED – IT’S SITUATED BELOW THE WORK TABLE;

– THE DRIVE TRANSFER USES AN AT10/16 COG BELT;

– THE COG BELT IS MADE OF POLYURETHANE WITH STEEL CORD;

– THE STOP CART IS MOUNTED ON STEEL RODS (HARDENED, CHROMIUM PLATED, POLISHED, WITH HARDNESS

LEVEL OF 64 HRC);

– THE TABLETOP IS 3470mm LENGTH AND 350mm WIDTH. THE TABLE TOP IS MADE OF AN 18mm THICK

LAMINATED BOARD. THE TABLE DIMENSIONS MAY BE CHANGED ON CUSTOMER’S DEMAND;

– POSITIONING LEDGE ALONG THE WHOLE LENGTH OF THE TABLE;

– THE FRAME IS MADE OF ANODIZED ALUMINUM PROFILES;

– ONE CAN ADJUST HEIGHT OF THE TABLE;

– THE 5,7” TOUCH SCREEN PROVIDES THE ABILITY TO SAVE USER-PREFERRED LENGTHS IN MEMORY AND

BROWSE OPERATIONS HISTORY;

– THE CONTROL CABINET IS EQUIPPED WITH A SAFETY CIRCUIT-BREAKER AND A MASTER SWITCH;

– THE STOP CART DRIVE SYSTEM USES CLOSED-LOOP CONTROL;

– DYNAMIC MOVEMENT OF THE END CART (1 M/S FAST);

– ACCURACY OF MOVEMENT – ERROR IS LESS THAN 0,1 MM PER METER OF LENGTH;

– REQUIRED POWER SUPPLY: 230 V.

THE PA-1-3 SET INCLUDES:

– AN AUTOMATIC LINEAR SCALE, 3000mm LONG, WITH ALL REQUIRED CONTROL EQUIPMENT AND A TOUCH

SCREEN FOR AN OPERATOR;

– A WORKING TABLE, 3000mmLONG;

– A TABLE HAS A SAW FOR CUTTING ALUMINUM PROFILES.

29. ROLLER BLINDS CONTROL LIFT WK-1

THE EQUIPMENT IS DESIGNED FOR ROLLER BLINDS TESTING. THIS CONTROL LIFT ALLOWS CHECKING THE

LEVELNESS OF SLATS IN THE BLINDS. CHECKING THE BLINDS ENSURES THAT THE FABRIC IS PROPERLY

WINDED ON THE TUBE AND ALLOWS MAKING ADJUSTMENTS IF NECESSARY.

– FOOT-CONTROLLED;

– FAST AND EFFICIENT BLINDS INSPECTION;

– ADJUSTABLE DESIGN FOR DIFFERENT SIZED BLINDS;

– LIGHT AND DURABLE CONSTRUCTION.

SPECIFICATIONS:

POWER AND WATTAGE: 0,4 KW 3X380V/50HZ OR 230V/50HZ

DIMENSIONS: 3400x3100x500 mm

GUIDE MAXIMUM HEIGHT: 3000 mm (4000 mm OPTIONAL)

MAXIMUM WIDTH : 2000 mm (3000 mm OPTIONAL)

SLIDER’S SPEED: APPROX. 0,3 M/S

WEIGHT: APPROX. 60 KG.

30. AUTOMATIC END CUTTER OT-1/A

THE AUTOMATIC END CUTTER OT-1/A IS USED IN PLANTS OR WHOLESALE OUTLETS FOR CUTTING TEXTILE

MATERIALS. IT QUICKLY AND ACCURATELY CUTS A SEGMENT OF FABRIC TO THE REQUIRED LENGTH.

THEREFORE, IT CAN BE INSTALLED AS AN ADDITIONAL DEVICE FOR THE CUTTING TABLE, REWINDING MACHINE,

OR THE TEXTILE INSPECTION MACHINE. ON THESE MACHINES CAN BE INSTALLED THE CUTTING LENGTH

COUNTER AND THE COUNTER OF CUT SECTIONS.

WORKING PRINCIPLE:

THE WORK CYCLE ON THE END CUTTER OT-1/A IS AUTOMATIC (WHILE CUTTING, THE MATERIAL KNIFE MOVES IN

THE GUIDE WAY INDEPENDENTLY). AT CLIENT’S REQUEST, WILL PRODUCE AN END CUTTER THE NECESSARY

LENGTH (E.G. FOR A NON-STANDARD WIDTH OF CUTTING TABLE).

31. MANUAL END CUTTER OT-1/R

THE MANUAL END CUTTER OT-1/R IS THE DEVICE, WHICH IS USED IN PLANTS OR WHOLESALE OUTLETS FOR

CUTTING TEXTILE MATERIALS. ITS TASK IS QUICK AND ACCURATE CUTTING REQUIRED LENGTH OF THE OF

FABRIC PIECE.

THEREFORE, IT CAN BE INSTALLED AS AN ADDITIONAL DEVICE FOR THE CUTTING TABLE, REWINDING MACHINE,

OR THE TEXTILE INSPECTION MACHINE. ON THESE MACHINES CAN BE INSTALLED THE CUTTING LENGTH

COUNTER AND THE COUNTER OF CUT SECTIONS.

WORKING PRINCIPLE:

THE WORK CYCLE ON THE END CUTTER OT-1/R IS MANUAL. AT CLIENT’S REQUEST, WILL PRODUCE AN END

CUTTER THE NECESSARY LENGTH (E.G. FOR NON-STANDARD WIDTH OF THE CUTTING TABLE).

32. TEXTILE INSPECTION MACHINE PP-1

TEXTILE INSPECTION MACHINE PP-1 IS INTENDED FOR CHECKING QUALITY, REWINDING, AND REMEASURING OF

FABRIC. THE LAMP IN THE SCREEN SHINES THROUGH THE MOVING FABRIC TO ENABLE CHECKING ITS FOR

ERRORS, MECHANICAL DAMAGE, OR CONTAMINATION.

THIS EQUIPMENT IS WIDELY USED IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES

ENGAGED IN THE SALE OF FABRICS.

SPECIFICATIONS:

LENGTH: 260 CM
WIDTH: 85 CM
HEIGHT: 140 CM;
MAX WIDTH OF REWOUND CLOTH: 185 CM
SCREEN DIMENSIONS: 200X150 CM
WEIGHT: 100 KG
WEIGHT OF ROLL: 50 KG MAX
DIAMETER OF ROLL: 50 CM MAX
RE-WINDING SPEED: 60 METERS PER MINUTE
CLOTH LEADING SETUP: MANUAL
SCREEN SETUP: FLUENT 0° TO 35°.
EQUIPMENT: 2 SHAFTS WITH LIMITERS, METER COUNTER.

33. TEXTILE INSPECTION MACHINE PP-1 SUPER

TEXTILE INSPECTION MACHINE PP-1S IS INTENDED FOR CHECKING QUALITY, REWINDING, AND REMEASURING

FABRIC. THE LAMP IN THE SCREEN SHINES THROUGH THE MOVING FABRIC TO ENABLE CHECKING FOR

ERRORS, MECHANICAL DAMAGE, OR CONTAMINATION.

THIS EQUIPMENT IS WIDELY USED IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES

ENGAGED IN THE SALE OF FABRICS.

THE DRIVE – THREE PHASE MOTOR, WITH A WORM GEAR DRIVEN AND POWERED BY AN INVERTER THAT

ALLOWS YOU TO ACCURATELY SET THE SPEED OF REWINDING THE MATERIAL. ALL PARTS MADE FROM METAL,

MAKING THE EQUIPMENT MORE DURABLE AND RELIABLE. THE DRIVE IS CONNECTED TO A STEEL SLEEVE WITH

A SQUARE WOUND PIPE.

SPECIFICATIONS:

SCREEN: 2M X 0,5 M WITH NEON ILLUMINATION
WATTAGE: 0.25 TO 0.37 KW
INVERTER: HITACHI
METER COUNTER: VIGO (GERMAN)
REWINDABLE WIDTH: UP TO 185 CM
REWINDABLE DIAMETER: UP TO 50 CM
REWINDABLE WEIGHT: UP TO 65 KG
POWER: 230 V

34. TEXTILE INSPECTION MACHINE PP-1/K

TEXTILE INSPECTION MACHINE PP-1/K IS INTENDED FOR CHECKING QUALITY, REWINDING, AND REMEASURING

OF FABRIC. THE LAMP IN THE SCREEN SHINES THROUGH THE MOVING FABRIC TO ENABLE CHECKING ITS FOR

ERRORS, MECHANICAL DAMAGE, OR CONTAMINATION.

THIS EQUIPMENT IS WIDELY USED IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES

ENGAGED IN THE SALE OF FABRICS.

SPECIFICATIONS:

LENGTH: 253 CM
WIDTH: 122 CM
HEIGHT: 106 CM
MAX WIDTH OF ROLL: UP TO 185 CM
WEIGHT: 100 KG
REWINDABLE WEIGHT OF ROLL: UP TO 45 KG
DIAMETER OF ROLL: UP TO 45 CM
RE-WINDING SPEED: 50 METERS PER MINUTE
ROLL INSTALLATION: MANUAL

35. TEXTILE INSPECTION MACHINE PP-1/R

TEXTILE INSPECTION MACHINE PP-1 IS INTENDED FOR CHECKING QUALITY, REWINDING, AND REMEASURING OF

FABRIC. THE LAMP IN THE SCREEN SHINES THROUGH THE MOVING FABRIC TO ENABLE CHECKING ITS FOR

ERRORS, MECHANICAL DAMAGE, OR CONTAMINATION.

THIS EQUIPMENT IS WIDELY USED IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES

ENGAGED IN THE SALE OF FABRICS.

SPECIFICATIONS:
LENGTH: 260 CM
WIDTH: 85 CM
HEIGHT: 140 CM;
MAX WIDTH OF REWOUND CLOTH: 185 CM
SCREEN DIMENSIONS: 200X150 CM
WEIGHT: 100 KG
WEIGHT OF ROLL: 50 KG MAX
DIAMETER OF ROLL: 50 CM MAX
RE-WINDING SPEED: 60 METERS PER MINUTE
CLOTH LEADING SETUP: MANUAL
SCREEN SETUP: FLUENT 0° TO 35°.
END CUTTER: OT-1/R

36. REWINDING MACHINE PP-2

REWINDING MACHINE IS INTENDED FOR MEASURING / REWINDING FABRIC. THIS EQUIPMENT IS WIDELY USED

IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES ENGAGED IN THE SALE OF FABRICS.

SPECIFICATIONS:
LENGTH: 253 CM
WIDTH: 122 CM
HEIGHT: 106 CM
MAX WIDTH OF ROLL: UP TO 185 CM
WEIGHT: 100 KG
REWINDABLE WEIGHT OF ROLL: UP TO 45 KG
DIAMETER OF ROLL: UP TO 45 CM
RE-WINDING SPEED: 50 METERS PER MINUTE
ROLL INSTALLATION: MANUAL
РР-2 IS AVAILABLE IN 3 VERSIONS:
РР-2/А – STANDARD, REWINDING FABRIC, METER COUNTER
РР-2/B – VERSION WITH MANUAL CUTTING, METER COUNTER
РР-2/С – VERSION WITH AUTOMATIC CUTTING, METER COUNTER

37. REWINDING MACHINE PP-2 SUPER

REWINDING MACHINE IS INTENDED FOR MEASURING / REWINDING FABRIC. THIS EQUIPMENT IS WIDELY USED

IN SEWING FACTORIES, FURNITURE FACTORIES, AND ENTERPRISES ENGAGED IN THE SALE OF FABRICS.

SPECIFICATIONS:

WATTAGE: 0.25 TO 0.37 KW
THE INVERTER: HITACHI
METER COUNTER: VIGO (GERMAN)
REWINDABLE WIDTH: UP TO 185 CM
REWINDABLE DIAMETER: UP TO 50 CM
REWINDABLE WEIGHT: UP TO 65 KG
POWER: 230 V

38. CUTTING TABLE SK-3

SK-3 CUTTING TABLE IS BASIC CUTTING ROOM EQUIPMENT IN TAILORS’ AND UPHOLSTERERS’ SHOPS. THE

MODERN AND REVAMPED CONSTRUCTION WAS PRESENTED FOR THE FIRST TIME AT THE “INTERMASZ” FARE,

MARCH 2008.

THE WHOLE CONSTRUCTION IS MADE OF CLOSED STEEL PROFILES ENSURING PROPER DURABILITY AND

STIFFNESS. THE WORK-TOP MADE OF 25mm CHIPBOARD WITH EDGES COVERED WITH ALUMINUM ANGLES

THAT GUARANTEE DURABILITY. STEEL POWDER COATING ADDS THE ELEGANT LOOK OF THE WHOLE

CONSTRUCTION. THE SK-3 CUTTING TABLE CONSISTS OF MODULES AND CAN BE QUICKLY AND EASILY

EXTENDED AT ANY TIME. YOU CAN ALSO ADJUST THE TABLE HEIGHT (TO SOME EXTENT) AND LEVEL IT USING

ADJUSTING SCREWS.

SPECIFICATIONS:

STANDARD WIDTH OF TABLE: 1,83 M TO 2,07 M.
HEIGHT OF CUTTING TABLE: 90 CM.
EACH FOLLOWING SECTION INCREASES THE CUTTING TABLE BY: 1,1 M
ON CLIENT’S REQUEST WILL PRODUCE ANY LENGTH AND WIDTH OF THE CUTTING TABLE.

39. CUTTING TABLE SK-2 ANY LENGTH

SK-2 CUTTING TABLE IS BASIC CUTTING ROOM EQUIPMENT IN TAILORS’ AND UPHOLSTERERS’ SHOPS.

THE WHOLE CONSTRUCTION IS MADE OF CLOSED STEEL PROFILES ENSURING PROPER DURABILITY AND

STIFFNESS. THE WORK-TOP MADE OF 25mm CHIPBOARD WITH EDGES COVERED WITH ALUMINUM ANGLES

THAT GUARANTEE DURABILITY. STEEL POWDER COATING ADDS THE ELEGANT LOOK OF THE WHOLE

CONSTRUCTION.

AT CLIENT’S REQUEST WILL PRODUCE ANY LENGTH AND WIDTH OF THE CUTTING TABLE.

40. CUTTING TABLE’S FRAME SK-3 ANY LENGTH

SK-3 CUTTING TABLE IS BASIC CUTTING ROOM EQUIPMENT IN TAILORS’ AND UPHOLSTERERS’ SHOPS. THE

MODERN AND REVAMPED CONSTRUCTION WAS PRESENTED FOR THE FIRST TIME AT THE “INTERMASZ” FARE,

MARCH 2008.

THE WHOLE CONSTRUCTION IS MADE OF CLOSED STEEL PROFILES ENSURING PROPER DURABILITY AND

STIFFNESS. THE WORK-TOP CAN BE MADE OF 25mm CHIPBOARD WITH EDGES COVERED WITH ALUMINUM

ANGLES THAT GUARANTEE DURABILITY. STEEL POWDER COATING ADDS THE ELEGANT LOOK OF THE WHOLE

CONSTRUCTION. THE SK-3 CUTTING TABLE CONSISTS OF MODULES AND CAN BE QUICKLY AND EASILY

EXTENDED AT ANY TIME. YOU CAN ALSO ADJUST THE TABLE HEIGHT (TO SOME EXTENT) AND LEVEL IT USING

ADJUSTING SCREWS.

SPECIFICATIONS:

FRAME MADE FOR THE STANDARD TABLETOP WIDTH OF TABLE: 1,83 M – 2,07 M.
HEIGHT OF CUTTING TABLE: 90 CM.
EACH FOLLOWING SECTION INCREASES THE CUTTING TABLE: BY 1,1 M.

41. CUTTING TABLE’S FRAME SK-2 ANY LENGTH

THE WHOLE CONSTRUCTION IS MADE OF CLOSED STEEL PROFILES ENSURING PROPER DURABILITY AND

STIFFNESS. THE CUTTING TABLE CONSISTS OF MODULES AND CAN BE QUICKLY AND EASILY EXTENDED AT ANY

TIME. TABLETOP FRAMES MADE IN POLAND USING POLISH MATERIALS.

SPECIFICATIONS:

SEGMENT LENGTH: 1550 mm TO 1900 mm
SEGMENT WIDTH: 1400 mm
SEGMENT HEIGHT: 840 mm TO 900 mm

42. UPHOLSTERED CHAIR KT-1 / NON-UPHOLSTERED CHAIR KT-2

INDUSTRIAL CHAIRS KT-1/KT-2 ARE DESIGNED FOR USING IN SEWING WORKSHOPS, WHERE STURDY

CONSTRUCTION, LONGSTANDING AND COMFORT ARE SIGNIFICANT.

WHY THESE CHAIRS ARE LONGSTANDING AND USEFUL?

– ALL IMPORTANT PARTS IN THE CHAIR ARE MADE OF METAL;

– SCREW CHAIR CONSTRUCTION PROVIDES DURABILITY (UNLIKE CHAIRS WITH SHOCK ABSORBER);

– UPHOLSTERY MADE IN GREY COLOR, WHERE THE DIRT AND SPOTS ARE NOT VISIBLE;

– UPHOLSTERY MADE OF POLYESTER FABRIC

WHY THESE CHAIRS ARE COMFORTABLE AND SAFE?

– COMFORTABLE SEAT AND BACKREST DESIGNED TO CARRY THE BODY’S WEIGHT AND DISTRIBUTE THE

LOADS;

– LUMBAR SUPPORT THAT ALSO REDUCES OVERALL TIREDNESS AND PROVIDES GREATER PRODUCTIVITY.

CHAIRS KT-1/KT-2 ARE THE BEST VALUE FOR MONEY.

SPECIFICATIONS: CHAIR: KT-1 KT-2
BASE DIMENSIONS: 40X26 CM 40X17,5 CM
SEAT DIMENSIONS: 40X44 CM 40X42 CM
SIZE OF THE BOTTOM CROSS 60 CM 60 CM
HEIGHT ADJUSTMENT: 50 TO 76 CM 50 TO 76 CM
ADJUSTING ABILITY: YES YES

SEAT: UPHOLSTERED NON-UPHOLSTERED

43. SEWING MACHINE TABLE S-1

TABLE FOR A SEWING MACHINE WITH PEDAL, AND THE PLASTIC SHELF. WE CAN PRINT ANY LOGO ON THE

TABLE EDGE. TABLE LEGS ARE MADE OF 2 mm THICK POWDER COATED STEEL. THE TABLE IS PACKED IN A

CARDBOARD BOX.

44. UNWINDING DEVICE LS-5 FOR 5 ROLLS

SPECIFICATIONS:
WIDTH OF ROLL: UP TO 190 CM
DIAMETER OF ROLL: UP TO 55 CM
WEIGHT OF ROLL: UP TO 55 KG
CAPACITY: UP TO 5 ROLLS
SUITABLE FOR ANY CUTTING TABLE

45. UNWINDING DEVICE LS-3 FOR 3 ROLLS

SPECIFICATIONS:

WIDTH OF ROLL: UP TO 190 CM
DIAMETER OF ROLL: UP TO 55 CM
WEIGHT OF ROLL: UP TO 55 KG
CAPACITY: UP TO 3 ROLLS
SUITABLE FOR ANY CUTTING TABLE

46. UNWINDING DEVICE LS-1/K FOR ONE ROLL

SPECIFICATIONS:
WIDTH OF ROLL: UP TO 190 CM
DIAMETER OF ROLL: UP TO 55 CM
WEIGHT OF ROLL: UP TO 55 KG
SUITABLE FOR ANY CUTTING TABLE

47. UNWINDING DEVICE LS-1/K FOR ONE ROLL WITH BASKET

SPECIFICATIONS:
WIDTH OF ROLL: UP TO 190 CM
DIAMETER OF ROLL: UP TO 50 CM
WEIGHT OF ROLL: UP TO 80 KG
SUITABLE FOR ANY CUTTING TABLE

48. CART FOR TRANSPORTATION AND STORAGE OF UPHOLSTERED FURNITURE WT-1

THESE CARTS ARE WIDELY USED IN POLISH FURNITURE FACTORIES. CARTS ARE INTENDED FOR THE INTRA-

OPERATIONAL

TRANSPORT OF FURNITURE, STORAGE, AND DISPOSAL OF FINISHED PRODUCTS.

THE STRUCTURE OF THE CART GUARANTEES SAVING OF STORAGE SPACE – EMPTY TROLLEYS AFTER FOLDING

CAN BE

SLIPPED ONE INTO ANOTHER TAKING UP ONLY 20% AS MUCH SPACE. THE CART POSSESSES NON-MARKING WHEELS

SPECIFICATIONS:
LOADING HEIGHT: 300 mm
DISTANCE BETWEEN LEVELS: 900 mm
WHEELED SET: 100 mm
WIDTH: 2700 mm
DEPTH: 950 mm
HEIGHT: 1250 mm
WEIGHT: 34 KG
LOAD-BEARING CAPACITY: 300 KG.

49. CART WW-1 WITH BAG – FOR SEWING WORKSHOPS

CART WITH BAG (75X45X55 IS INTENDED FOR CARRY SMALL OBJECTS, TABLE WASTE, ETC. IT IS POSSIBLE TO COMBINE SEVERAL CARTS AND SAVE SPACE IN THE SEWING WORKSHOP.)

50. CART WK-2, WITH TWO BASKETS – FOR SEWING WORKSHOPS

VERY USEFUL CARTS IN ADDITION EQUIPPED WITH TWO BASKETS FOR SMALL ITEMS. STABLE AND RELIABLE

DESIGN WITH ADJUSTABLE HEIGHT, PROTECTORS THAT PREVENTING SLIP AND RUBBER COATED UPPER

SURFACE. THESE CARTS ARE VERY IMPORTANT IN THE MANUFACTURING PROCESS.

51. CART WW-2 FOR SEWING WORKSHOPS

VERY USEFUL CARTS. STABLE AND RELIABLE DESIGN WITH ADJUSTABLE HEIGHT, PROTECTORS THAT

PREVENTING SLIP AND RUBBER COATED UPPER SURFACE. THESE CARTS ARE VERY IMPORTANT IN THE

MANUFACTURING PROCESS.

52. CART FOR LEATHER KS-1

CART FOR LEATHER IS DESIGNED FOR STORAGE AND TRANSPORTATION OF THE SKIN. OUR OFFER IS

ADDRESSED MAINLY TO MANUFACTURERS OF LEATHER UPHOLSTERED FURNITURE. THE STRUCTURE IS MADE

OF POWDER COATED STEEL PROFILES.

SPECIFICATIONS:
LENGTH: 2200 mm
WIDTH OF SIDES 2,000 mm
HEIGHT: 1620 mm
DISTANCE BETWEEN SIDES: 800 mm
WHEELS DIAMETER: 150 mm
CAPACITY: 300 KG
WEIGHT: 120 KG

53. IRONING SURFACE PR-1

THE DEVICE INCLUDES: A FORM FOR IRONING (BLOCK) WITH FIXING ELEMENT.

SPECIFICATIONS:

LENGTH: 575 mm
WIDTH: 90 TO 65 mm
THICKNESS: 40 TO 25 mm
WATTAGE 100 W

54. LONG PIN SD-1 AND SHORT PIN SK-1

SPECIFICATIONS:

PIN TYPE: SD-1 SK-1

HEIGHT: 65mm 98mm
BASE DIA: 50mm 50mm

Leave a Reply