SANTE MECBI SOLVENTLESS LAMINATOR

SANTE MECBI SOLVENTLESS LAMINATOR

TO LAMINATE FOLLOWING MATERIAL:

LAMINATOR MECBI
POLYETHYLENE/PAPER PS/PE
OPP/ POLYETHYLENE PS/OPP
PAPER/ALLUMINIUM AL 6,5 MICRON/PAPER MALBORO
ALLUMINIUM/POLYETHYLENE METAL OPP/PE
OPP/ ALLUMINIUM METAL OPP/OPP
PET/AL
PET/PE

 

COATING WIDTH: 1200mm
MAX WEB WIDTH: 1220mm
Installed Speed: 300 m/1-
Prod. m/1-: UP TO 300
MAX OD REEL AT UNWIND: 800mm
ICD AT REWIND: 76mm
MAX OD REEL AT REWIND: 800mm
ICD AT UNWIND: 76mm
PAINT: LIGHT GREY RAL 9018
BUILT ACCORDING TO EC REGULATIONS
WORKING PRESSURE: 6 BARS
MOTORS: 37 KW
TWO COREMA: 26 KW
MOTOR VENTILATION: 2.2 KW
TOTAL INSTALLED POWER: 66 KW
POWER SUPPLY: 380/400 VOLTS @ 50 Hz
POWER CABINET: 2100mm TALL X 1200mm LONG X 600mm WIDE
MACHINE DIMENSIONS: 3000mm TALL (WITH VENTILATION ASPIRATION 3500mm) X 5195mm LONG X 2450mm WIDE
TRANSFER ROLLER COATED WITH SPECIAL RUBBER
COATING ROLLER DOUBLE WALL, WITH SPIRAL WATER FLOW INSIDE, CHROME PLATED ROLLER FACE
BACK-UP ROLLER, RUBBER COATED, AIR LOADED WITH TWO PISTONS
WITH SECONDARY UNWINDER
BONDING ROLLER
REWINDER
OVERHEAD STRUCTURE
THERMOCONTROL UNIT (2 UNITS), WITH ELECTROPUMP, PRESSURE GAUGES, THERMOMETER, PROBES
SAFETY DEVICE TO PROTECT FROM NIPS
EDGE GUIDER AFTER EACH UNWINDER
DOPAG MIXING AND PUMPING SYSTEM FOR DOSING, OUTPUT AND MIXING TWO-COMPONENT ADHESIVES AT WARM TEMPERATURE, TWO TANKS 36 LITER CAPACITY

QUANTITY: 1

CHECK HERE : SANTE MECBI

HOT-MELT LAMINATION LINE, WIDTH 2600mm, 30 METERS PER MINUTE, YEAR 2007

NUMBER: AAEL-4214

HOT-MELT LAMINATION LINE, WIDTH 2600mm, 30 METERS PER MINUTE, YEAR 2007

BASIC WEIGHT: 50 TO 1,000 GRAMS PER SQUARE METER

FINISHING ROLLS DIAMETER: MAX. 1500mm

OPERATING SIDE: LEFT

CONSISTING OF:

1) DOUBLE UNWINDER

MAX ROLL DIAMETER: 1500mm

2) 1ST JOINING STAND

3) 1ST ACCUMULATOR

4) 1ST PULLING UNIT, WITH DANCING ROLLER

5) 1 X CARRIAGE WITH 2 UNWINDERS

MAX. ROLL DIAMETER: 1200mm

6) 2ND JOINING STAND

7) 2ND ACCUMULATOR, WITH BYPASS ROLLER AND SPREADER ROLLER

8) 2ND PULLING UNIT, WITH DANCING ROLLER

9) CALENDER WITH HOT-MELT UNIT

BRAND: HIP MITSU, MODEL CA015, YEAR 2003

1 X COATING HEAD WITH FUSER AND 3 INDEPENDENT TANKS (2 FUSERS FOR BIG BARRELS)

10) 3RD ACCUMULATOR, WITH SPREADER ROLLER

11) 3RD PULLING UNIT, WITH DANCING ROLLER

12) A-FRAME WINDER, WITH HYDRAULIC PRESSER ARM DRIVEN

MAX. ROLL DIAMETER: 1500mm

13) ELECTRONIC COMPONENTS

ELECTRIC BOARDS WITH CABLES BETWEEN BOARDS AND MACHINES

SIEMENS PLC

SIEMENS INVERTER / CONTROLS

ELECTRIC SCHEMATIC AND EC MANUAL IN PAPER AND COPY OF SOFTWARE

EMAIL US FOR PRICE & PICTURES

INCLUDE OUR REFERENCE NUMBER