Rss

  • redit
  • delicious
  • youtube

Archives for : PRINTING MACHINES

STORK RD-IV ROTARY PRINTING WIDTH 2850mm

E-NUMBER: AAEM-5163 (121213CMYB11RX) L

STORK RD-IV ROTARY PRINTING WIDTH 2850mm WITH 12 COLORS
RAPPORT 640
WIDTH RUBBER BELT 3040mm
UNROLLING DEVICE FOR A-FRAME
BRUSHING UNIT WITH ASPIRATION
GUIDERS FOR FABRIC AND KNITTING
THERMOPLAST
STORK DRYER OF 2 SECTIONS, HEATED BY GAS
TOTAL LENGTH 8 METERS
EXIT BY PLAITER

QUANTITY: 1

REGGIANI PRIMA FLATSCREEN

E-NUMBER: AAEM-5243 (1313RPTFXX12) L

REGGIANI PRIMA FLATSCREEN PRINTING MACHINE YEAR 2005 WIDTH 3200mm WITH 15 COLORS
USEFUL LENGTH: 48 METERS
(4) X DRYING CHAMBERS WITH GAS HEATING

QUANTITY: 1

ZIMMER SAMPLE PRINTING, LAFER BRUSHING

NUMBER: AAEK-8710

ZIMMER SAMPLE PRINTING MACHING YEAR 1997 WIDTH 2400mm

ROTARY BLANKET
ONE SCREEN
MAGNETIC SYSTEM
50 M. BLANKET LENGTH
30 M. MACHINERY LENGTH

QUANTITY: 1

NUMBER: AAEK-5968

LAFER BRUSHING MACHINE GSI106 WIDTH 2200mm YEAR 2001
COMPRISING:
SEWING DETECTOR
6 X BRUSHES
REWINDER
VACUUM
SPARE PARTS:
6 X BRUSHES FOR GSI 106

QUANTITY: 1

BOMBI IMPREGNATION MACHINE

NUMBER: AAEE-8453

BOMBI IMPREGNATION MACHINE FOR SALE – 3600mm
(RESIN IMPREGNATOR / SATURATOR)
3600mm WORKING WIDTH
Y.O.M.: 1998/1999
AS NEW CONDITION
142″ INCHES WORKING WIDTH
LOW NUMBER OF WORKING HOURS
THE MACHINE HAS BEEN USED FOR SAMPLES ONLY AND AS A CONVEYOR DURING REGULAR PRODUCTION.
PROCEDURE – WADDING (WEB) IS DIPPED IN A LIQUID DISPERSION, NEXT SUCKED WITH VACUUM IN ORDER TO TAKE OUT THE RESIN SURPLUS.
WEIGHT OF THE WADDING – 50 TO 150 GR/M2.
WADDING PASSES – BETWEEN BELT AND ONE PERFORATED STAINLESS STEEL ROLL.
RESIN TYPE CAN BE ACRYLIC OR VINYL, WITH ANTI-FOAM AGENT IN.
BELT WIDTH – 3600mm (141.7 INCHES).
BELT TYPE – PERFORATED FIBERGLASS NET, TEFLON COATED.
ROLLS WIDTH – 3910mm (154 INCHES).
STAINLESS STEEL TANK TO HOLD \RESIN BATH.
LEVEL CONTROL.
AIR DRIVEN MEMBRANE PUMP, TO KEEP CONSTANT LEVEL IN THE TANK.
SUCTION SLOT, MADE OF STAINLESS STEEL.
AIR/LIQUID SEPARATOR, TO SEPARATE AIR FROM RESIN.
SEPARATOR TANKL: STAINLESS STEEL.
AIR SUCKING PUMP IS MOTOR DRIVEN.
POSSIBLITY OF ADJUSTING AIR SUCTION FLOW, IN ORDER TO CALIBRATE THE AMOUNT OF RESIN REMAINING IN THE WADDING (THE WEB).
CONTROL PANEL SEPARATE FROM MACHINE.
BELT SPEED: 1.5 TO 5 M/MIN.
SPEED VARIATION 3-PH MOTOR FREQUENCY CONVERTER.
SPEED IN SYNC WITH CROSS LAPPER, SPEED REFERENCE SIGNAL.
AVAILABLE SPEED REFERENCE SIGNAL FROM CONTROL PANEL
SET THE MACHINE IN SYNC AFTER THE SATURATOR.
VOLTAGE: 575 V/60 HZ/3-PHASE.
MACHINE FITTED WITH SPECIAL FIXTURES IN ORDER TO FIT A 2-ROLL FOAM APPLICATOR.

(PICTURES AVAILABLE)

QUANTITY: 1

BUSER FLAT PRINTING MACHINE

NUMBER: AAEK-9363

BUSER FLAT PRINTING MACHINE
Y.O.M.: 2003
WIDTH 1650mm
COLORS: 14
WIDTH BELT: 2000mm