Rss

  • redit
  • delicious
  • youtube

Archives for : Textile testing equipment

Complete Knitting, Dyeing, & Finishing Textile Machines Plant

stenter

stenter

Complete Knitting, Dyeing, & Finishing Textile Machines Plant

6 Unitex Double Jersey Knitting Machines
– Model UDX 3.2DK, 2013 Year
– 30” diameter, 28 gauge, 96 feeders, 3.2 feeders to the inch, inverter driven

7 Unitex Double Jersey Knitting Machines
– Model UDX 2.4DE, 2013 Year
– 4 track, 30” diameter, 18 gauge, 76 feeders, 2.4 feeders to the inch, inverter driven

6 Unitex Double Jersey Knitting Machines
– Model UDX 2.4DE, 2013 Year
– 4 track, 30” diameter, 28 gauge, 72 feeders, 2.4 feeders to the inch, inverter driven

6 Unitex Single Jersey Knitting Machines
– Model UBX 3SKS, 2013 Year
– 4 track, 30” diameter, 28 gauge, 90 feeders, 3 feeders to the inch, inverter driven
Unitex Knitters photos and more information

2 Terrot Double Jersey Mini Jacquard Knitting Machines
– (1) Model UP 372, 30″ diameter, 18 gauge
– (1) Model UP 372, 30″ diameter, 28 gauge
Terrot Knitters photos and more information

1 Orizio Single Jersey Electronic Knitting Machine
– Model MJM CBE, 2001 Year
– 30” diameter, 28 gauge, 72 Feeders
– with Siemens Sitex Three Way
Orizio Knitter photos and more information

2 MCS Dynamica High Temperature Fabric Dyeing Machines
– 2014 year, approximate capacity 600 kilos
– 2 independent ports for 1 or 2 tube operation Automatic adjustment of fabric nozzle diameter, 76mm to 300mm, Full capacity vertical preparation tanks for dye liquor preparation with automatic programming, Self cleaning filters, Mixing tank and Chemical tank, both with automatic dosing, heating and filters
MCS Dynamica photos and more information

2 Then Airflow Synergy High Temperature Fabric Dyeing Machines
– (1) 6-port machine, 2010 year, approximate capacity 2000 kilos
– (1) 4-port machine, 2010 year, approximate capacity 1400 kilos
– 1:2 liquor ratio, Model SYN 1000, Automatic salt dosing tank, Mixing tank and Chemical tank, both with automatic dosing, heating and filters, Steam booster, Automatic touch control
Facility for Spectra dye (Tie dye), Inverter control
Self cleaning filters, take off winch with forward and reverse
Then Airflow photos and more information

1 MCS Multiflow High Temperature Fabric Dyeing Machine
– 4-port, 2009 year, approximate capacity 1200 kilos, 1:4/5 liquor ratio, Model: New First Fast F-4XJ
– Full capacity preparation tank for dye liquor preparation with automatic programming, Mixing tank and Chemical tank, both with automatic dosing, heating and filters, Constant recirculation of liquor pump, Self cleaning filter (spare filter)
Automatic adjustment of fabric nozzle diamater, 76mm to 300mm, Internal plaiters for folding inside machine, Take off winch
MCS Multiflow photos and more information

1 MCS Sample Jet
– 1997 year, 50 kilo capacity

1 Fully Automatic Salt Dissolving and Dispensing Unit
– with auto weigh and automatic transfer to dyeing machines

3 Silos
– (2) with 32,000 kilo capacity, (1) with 1,000 kilo capacity

1 Water Softening Unit

1 Comatex Tubular Stitching Machine
– for preparing fabric for dyeing, Year 2009

1 Wellman Robey European Steam Boiler
– 6800 kg per hour, Saacke gas burner, NDT ultra sound tested 2016, Variable speed inverter, Direct digital air control, Digital controller, Auto level control, Oxygen trim probe in exhaust, Economiser in chimney, 2 dedicated inlet pumps, Programmed auto blow down, Gas booster, Hot well with auto dosing and softening

1 Wellman Robey YGINIS Steam Boiler
– Model Sygnett, Year 1992, 3000 kg per hour, Electric level control, Twin pumps, Gas booster

1 Stork RD4 Rotary Printer
– Knitted entry, Year 1994, 20 Colors, 1850 mm print width, 640 mm repeat, Gas dryer 3 bay 3 pass or single pass, Auto squeegee washer, Screen washer, Van Wyck tub washer, Large quantity of spares and accessories

1 Klieverik Transfer Print Machine
– Model TC 131 /2000, Foiling attachment, 1000mm drum, New blanket

2 Shelton Inspection Machines

Complete Testing Laboratory

Complete Color Laboratory

Complete Conditioning Room

1 LKLH Drying and Heat Setting Stenter
– 2010 year, 2400mm working width
– Automatic fabric centralizing and uncurling, Bow and skew weft straightener with 6 heads, Long entry with 2 screw adjustments, Scroll rollers at entry, E and L fabric guiders, E and L selvedge uncurlers, 2 steam units in entry section, Horizontal pin chain with fabric retaining clips, Fabric support in entry for delicate fabrics, Edge gumming and selvedge removal, 8 drying/heat setting chambers with gas heating, Easy clean nozzles, Damper control on each bay, Inverter drive fans, Cooling zone, top and bottom, Steam chain cleaner, Automatic lubrication, Manual bow and skew at exit, Tensionless take off rollers, Descending arm batch, Plaiter with oscillating rollers
LKLH Stenter photos and more information

Automated Air Scrubber for Stenter Exhaust
– Stainless steel construction, Air filters, Aluminum finned heat exchangers to heat water (to 34 degrees), Inverter drive, Electrostatic eliminators, Auto clean down, Modular system

Digital Water Resistance Tester

NUMBER: L-2033

DIGITAL WATER RESISTANCE TESTER

TO DETERMINE THE RESISTANCE OF A FABRIC TO THE PENETRATION OF WATER UNDER HYDROSTATIC PRESSURE.
STANDARDS: FTMS 191A 5512 AND ASTM D751

TESTING MODES

1.TURBOCHARGED
2.CONSTANT PRESSURE TIME
3.CONSTANT PRESSURE REGULARLY
4.FLEXING RESISTANCE RELAXATION METHOD
5.LEAKAGE WATER METHOD

TECHNICAL SPECIFICATIONS

TEST RANGE: 500PA TO 200KPA
WATER TANK LIFTING SPEED: 1KPA TO 30KPA
CIRCULAR CLAMP INNER DIAMETER: 31.8mm

TECHNICAL PARAMETERS

1.POWER SOURCE: AC 220V±10% 50HZ 100W
2.EXTERNAL DIMENSION:550 X 400 X 500mm
3.WEIGHT: 60KG

QUANTITY: 1

USTER HVI 1000

HISB – 117151137

01 Set Uster HVI 1000 – Year 2004-05
Complete with;
Length & Strength:
Length module used for measurement of length parameters
such as UHML, ML, Uniformity & SFI etc
Strength Module bundle strength in gram/tex and elongation in %.
Mic Module :
Measurement of Microniare.
Color & Trash module :
Color Module measures Reflectance(Rd) & Brightness(+b) and
color grade for cotton classing
Trash module shows Trash %, trash count and trash grade.
With Windows Operating platform with LCD display & Printer.
With Creels, Printer, Monitor, Software CD’s & Instruction booklets etc.
Condition Very Excellent
Delivery Immediate

MARTINDALE ABRASION AND PILLING TESTERS

E-NUMBER: M-5212 (131311DCP12UC) L

MARTINDALE ABRASION AND PILLING TESTERS
MODEL: C13C

USAGE: TO DETERMINE THE ABRASION AND PILLING RESISTANCE OF ALL KINDS OF TEXTILE STRUCTURES

SAMPLES ARE RUBBED AGAINST KNOWN ABRADENTS AT LOW PRESSURES AND IN CONTINUOUSLY CHANGING DIRECTIONS AND THE AMOUNT OF ABRASION OR PILLING IS COMPARED AGAINST STANDARD PARAMETERS.
THE UNIQUE DESIGN ALLOWS REMOVAL OF INDIVIDUAL SAMPLE HOLDERS FOR EXAMINATION WITHOUT LIFTING THE TOP MOTION PLATE
STANDARD SAMPLE HOLDERS AND 9 AND 12KPA WEIGHTS ARE INCLUDED

FEATURES:

FIVE TEST PATTERNS (24 x 24, 24 x 60, 60 x 60 LISSAJOUS FIGURE CURVE, 60, 24 STRAIGHT LINE PATTERN)
TWO KINDS OF COUNTING METHODS, POSITIVE COUNTING AND NEGATIVE COUNTING METHOD
GUIDE PLATE DESIGN WITHOUT TURNING OVER, SAMPLE WITHOUT MOVEMENT
PLC MODULARIZATION CONTROL, SEVEN INCHES COLOR TOUCH SCREEN
SERVO SYSTEM SYSTEMATIC ELECTRIC MOTOR IS WITH STABLE OPERATION AND WITHOUT NOISE
FULL ALUMINUM COVER PLATE, MODULES OF STAINLESS STEEL GRINDING HEAD AND HEAVY PUNCH, ETC.

KEY SPECIFICATIONS:

CONTROL MODE: PLC CONTROL AND TOUCH SCREEN DISPLAY
COUNTER RANGE: 0 – 999999 TIMES
RELATIVE MOVEMENT SPEED (HOLDER AND PLATFORM): 50±2R/MIN (20-70R/MIN SETTABLE)
SAMPLING HAMMER MASS: 2385±10G

WEIGHT: 148KG
DIMENSION: 89 x 72 x 65CM
STANDARDS: ISO 5470, ISO 12945, ISO 12947, ASTM 4966/4970

STANDARD ACCESSORIES:

WEIGHT 9 AND 12 KPA
STANDARD ABRADENTS FABRIC – 2 PCS FOR EACH HEAD
STANDARD BACKING FOAM 38mm BOX OF 60PCS
STANDARD WOVEN FELT DISCS 140mm – 2 PCS FOR EACH HEAD
STANDARD WOVEN FELT DISCS 90mm – 2 PCS FOR EACH HEAD
PHOTOGRAPHS (COPY ONE)

ENGLISH MANUAL

CERTIFICATE OF QUALITY
OPTIONAL ACCESSORIES:
SAMPLE CUTTER 38mm, 90mm, 140mm
PHOTOGRAPHS (MADE IN UK)

QUANTITY: 1