Rss

  • redit
  • delicious
  • youtube

THERMO BONDING

NUMBER: AAEK-9869

THERMOADSPUN LACE LINE 3000mm WIDE 600 LBS PER HOUR PRODUCTION

CONSISTING OF:

1 TOP WEB BLEND LINE, CONSISTING OF; (3) FIBER CONTROLS HOPPERS, MODEL N/A, YEAR 1982,
WITH 12” EXTENDED APRONS, AND (1) CMC PRE-FEEDER WITH 6’ EXTENDED APRON, NO WEIGH PANS

1 32” FIBER TRANSPORT CONVEYOR WITH TRANSFER CONVEYOR AND GORING KERR METAL DETECTOR

2 CMC 36” ROB OPENERS, MODEL N/A, YEAR 1980, SERIAL NUMBER N/A WITH BLOW IN HOOD AND METERING ROLL, TV425 INLET FAN AND TV425 EXIT FAN

1 TRUETZSCHLER MULTICEL MIXER, MODEL MPM-10, YEAR 1990, SERIAL NUMBER N/A

1 BOTTOM WEB BLEND LINE, CONSISTING OF; (4) FIBER CONTROLS HOPPERS, MODEL N/A, YEAR 1982, SERIAL NUMBER N/A, (3) WITH 2’ EXTENDED APRONS AND (1) WITH 6’ EXTENDED APRON, NO WEIGH PANS

1 32” FIBER TRANSPORT CONVEYOR WITH TRANSFER CONVEYOR AND GORING KERR METAL DETECTOR

3 CMC 36” ROB OPENERS WITH BLOW IN HOOD AND METERING ROLL, TV425 INLET FAN AND
TV425 EXIT FAN

1 TRUETZSCHLER MULTICEL MIXER, MODEL MPM-10, YEAR 1990, SERIAL NUMBER N/A

3 HOLLINGSWORTH 2.2 METER TANDEM MASTER CARDS, MODEL N/A, YEAR 1993, SERIAL NUMBER N/A WITH BREAKER AND FINISHER CARD; FIBER FEED FROM TRUETZSCHLER CHUTE, MODEL 536 FBK-2250,
YEAR 1993, SERIAL NUMBER N/A (TOP WEB – 3A, 3 & 4) WITH UNDER CARD TRANSFER FLOOR CONVEYOR

2 HOLLINGSWORTH 2.2 METER TANDEM MASTER CARDS, MODEL N/A, YEAR 1993, SERIAL NUMBER N/A WITH BREAKER AND FINISHER CARD; FIBER FEED FROM TRUETZSCHLER CHUTE, MODEL 536 FBK-2250,
YEAR 1993, SERIAL NUMBER N/A (BOTTOM WEB – 1 & 2) WITH UNDERCARD TRANSFER FLOOR CONVEYOR

2 SETS OF MOUNT HOPE WEB SPREADER SECTION, (11) BOW ROLLS PER SET

1 SPINNBAU 3.2 METER TURBO CARD (RANDOMIZER), 3.2 METER WIDE, WITH ENTERING BELT, MAIN CYLINDER AND AIR DOFF AND DISCHARGE BELT

1 FLEISSNER 3.2 METER HYDRO FIBER ENTANGLING LINE, MODEL N/A, YEAR 1999,
SERIAL NUMBER T-6449, CONSISTING OF:

A. FLAT BED WET-OUT SECTION

B. FIRST PATTERN ROLL SET (2) WITH TWO MANIFOLDS

C. ENTANGLER FLAT BED WITH SIX MANIFOLDS

D. PATTERN ROLL WITH THREE MANIFOLDS

E. DEWATERING BELT (SUCTION)

F. HIGH PRESSURE PUMPS (1100 HP & 200 HP)

G. WATER FILTRATION SYSTEM (6 SAND FILTER, SEPARATION TANK)

1 GREENVILLE STEEL STAINLESS/RUBBER NIP ROLLS

1 STAINLESS STEEL DRYER HOUSING WITH (40) MORRISON HIGH PRESSURE DRY CANS, 126” FACE

1 KUSTERS 3.85 METER (3) ROLL HOT OIL CALENDER, TYPE 213.50, YEAR 1983, SERIAL NUMBER N/A, 3.6 METER WORKING WIDTH, (2) CHILL ROLLS, AND KONAS CLOSED SYSTEM HOT OIL HEATING UNIT

1 EUROTHERM BETA GAUGE, 153” SCANNING FRAME

1 PARKINSON WINDER, MODEL MARK III, YEAR N/A, SERIAL NUMBER 82-576, 60” DIAMETER ROLLS

1 CAMERSON UNWIND/SLITTER/REWIND, SINGLE TURRET UNWIND STAND ORDER NUMBER 5165, 3/1985, BELT DRIVEN POSITIVE UNWIND, SCORE CUT SLITTING SECTION (4 KNIVES) AND SINGLE ARBOR REWIND WITH PRESS ROLL, MAXIMUM 50” DIAMETER WIND-UP, DOFFING TABLE AND UP-ENDER

A/C INVERTER DRIVE

NUMBER: AAEK-9870

THERMO-BOND LINE (POLYPROYLENE) 3556mm WIDE-450 LBS PER HOUR

6 FIBER CONTROLS FEED HOPPERS WITH CONVEYOR, MODEL M6-VBFX36, YEAR 1980, 75 HP,
SERIAL NUMBERS 3936, 3925, 3928, 3927, 3929, 3926

1 CMC PREFEED REWORKABLE WASTE FEEDER FROM SLITTERS

4 CAROLINA MACHINERY WORKS RANDO CLEANERS, MODEL VARIOUS, YEAR VARIOUS, WITH
BROWN & SEBO CHUTE FEEDS AND TEMAFA OPENER PIN; EACH UNIT HAS TRUTZSCHLER MATERIAL TRANSPORT FANS AT BACK OF UNIT FEEDING INTO 2.2 METER HOLLINGSWORTH TANDEM CARDS

1) MODEL RC-36, SERIAL NUMBER RC-36-6633

1) MODEL 20S/18, YEAR 1994

2) MODEL R08-36, SERIAL NUMBER ROB-36-6635

2) MODEL 6159/78, YEAR 1978

3) MODEL ROB-36, SER ROB-36-C34

3) MODEL N/A, SERIAL NUMBER N/A

4) MODEL RC-36, SERIAL NUMBER RC-36-6733

4) MODEL 6159/78, YEAR 1978

4 HOLLINGSWORTH 2.2 METER TANDEM MASTER CARDS, MODEL N/A, YEAR 1990, SERIAL NUMBER N/A WITH BREAKER AND FINISHER CARD; FIBER FEED FROM TRUETZSCHLER CHUTE, MODEL FBK-2250, YEAR VARIOUS, SERIAL NUMBER N/A (TOP WEB – 3A, 3 & 4) WITH UNDER CARD TRANSFER FLOOR CONVEYOR

FBK2250 CHUTE FEEDS

1) MODEL 535-58-02, YEAR 1986, SERIAL NUMBER 118684

2) MODEL 535-58-02, YEAR 1990, SERIAL NUMBER 152895

3) MODEL 536-58-02, YEAR 1990, SERIAL NUMBER 152800

4) MODEL 536-58-02, YEAR 1998, SERIAL NUMBER 152799

1 MOUNT HOPE (15) BOW ROLL SPREADER, WITH ENTRY STAND AND EDGE SLITTERS WITH VACUUM SELVAGE WASTE REMOVAL FOR CYCLED BACK TO CMC PREFEED

1 WEB CONDENSER ROLL WITH VACUUM SUCTION FEEDS CALENDAR

1 KUSTERS 3.85 METER (3) ROLL HOT OIL CALENDER, TYPE 213.50, YEAR 1983, SERIAL NUMBER N/A, 3.6 METER WORKING WIDTH, (2) CHILL ROLLS, AND KONAS CLOSED SYSTEM HOT OIL HEATING UNIT

1 LFE BETA GAUGE MODEL HU657, SERIAL NUMBER 2001

1 PARKINSON 3.2 METER BATCHER, MODEL 83-30, YEAR N/A, SERIAL NUMBER N/A

WEB IS CONVEYED VIA P&H HOIST ONTO CAMERON MONTROSS (4) HEAD REWIND SATND WITH SLITTER HEAD WHICH DOFFS ONTO (2) CRADLES HEADING FOR AUTOMATIC STRETCH WRAPPERS

D/C DRIVE

REFERENCE NUMBER: K-9871

ADHESIVE BOND LINE (POLYESTER) 3556mm WIDE- PRODUCTION 500 LBS PER HOUR

1 FIBER CONTROLS FIBER BLEND LINE WITH (7) FIBER CONTROLS HOPPER FEEDERS, MODEL M-10,
YEAR 1980,

SERIAL NUMBER N/A, WITH ELECTRONIC WEIGHT PAN FEED AND HUMP MAGNET

1 FIBERS CONTROLS BI-DIRECTIONAL 32” CONVEYOR WITH (2) FIBER STOCK FANS

2 FIBER CONTROLS HOPPERS, MODEL M10, YEAR 1980, SERIAL NUMBER N/A, WITHOUT WEIGH PANS
WITH TRUETZSCHLER TV-300 VARIABLE SPEED STOCK FAN

1 FIBER CONTROLS FIBER TRANSFER CONVEYOR WITH GORING KERR METAL DETECTOR

4 CMC 36” ROB WITH (2) TRANSFER ROLLS EACH, AIR BOX AND FIBER CONTROLS METERING ROLLS

4 HOLLINGSWORTH 2.2 METER TANDEM MASTER CARDS, MODEL N/A, YEAR 1985, SERIAL NUMBER N/A WITH BREAKER AND FINISHER CARD; FIBER FEED FROM HERGETH CHUTE, MODEL DS, YEAR 1985,
SERIAL NUMBER N/A (BOTTOM

WEB – 1 & 2) WITH UNDER CARD TRANSFER FLOOR CONVEYOR

1 SETS OF MOUNT HOPE WEB SPREADER SECTION, (15) BOW ROLLS PER SET

2 ACCU-NIP WET-OUT BOXES, (3) ROLLS, STAINLESS IMMERSION PANS AND EDGE TRIMMERS

1 SET OF (50) HORIZONTAL DRY CANS, 23″ DIAMETER X 144” WIDE, HIGH PRESSURE 125 PSI,
TEFLON COATED CANS, BELT DRIVEN, (6) DRIVE MOTORS, CONDENSATE RETURN TANK

1 SET OF ERHARDT LEIMER 18” AIR GUIDERS ON SCREEN STAND

1 LFE BETA MEASURING HEAD, MODEL SCL-77A, SERIAL NUMBER 5027

1 PARKINSON 160″ (3) ROLL BATCHER, MODEL N/A, YEAR N/A, SERIAL NUMBER 80-490 WITH
3,200 LB. HOIST FOR DOFFING

1 DUSENBURY UNWIND/SLITTER/REWIND, 156” WIDE, WITH SINGLE TURRET LET-OFF, OPERATOR PLATFORM, WINDER WITH PRESS ROLL AND (10) SCORE CUT SLITTING HEADS, DISCHARGE TABLE AND UP-ENDER

1 INFRA PAK STRETCH WRAPPER, MODEL SW-4000, SERIAL NUMBER 81-1847, 120” WIDE

A/C INVERTER DRIVE

Leave a Reply