Rss

  • redit
  • delicious
  • youtube

TSUDAKOMA LOOMS

NUMBER: AAEA-1249
TSUDAKOMA’S AIR JET LOOM, TYPE ZAX9100, YEAR 2007, 3400MM, STAUBLI DOBBY

2 COLOR
SHEDDING: STAUBLI DOBBY 2861B (16 LEVERS)
LEVERS INSTALLED 12 – 16
DOUBLE BACK ROLLER

EACH MACHINE CONTAINS:
WEFT FEEDER: 2
HEALD FRAME: 10
WARP BEAM (SPLIT, 914MM): 1.5
CLOTH ROLLER: 1.5
FLAT HEALD AND DROPPER: 8,000 EACH
POWER : 380V/50HZ

QUANTITY: 62

REFERENCE NUMBER: AAEP-2669
TSUDAKOMA R-190CM ZAX AIRJET LOOMS YEAR 2002 WIDTH 1900mm 2 COLORS CAM

FDP SENSOR FOR 2 COLORS
WBS (WEFT BRAKE SYSTEM)
STRETCH NOZZLE
INCLINED CLOTH FELL WITH TOP MOUNTED TEMPLE
INDEPENDENT SUB NOZZLE TIMING CONTROL
BLANK START CONTROL
CAM MOTION STAUBLI TYPE 1661 WITH 07 LEVERS INSTALLED
WARP BEAMS Ø 1016mm
4 HEALD FRAMES
5000 HEALDS “C” TYPE
5000 DROPPERS

QUANTITY: 36

NUMBER: AAEP-1218
TSUDAKOMA ZAX AIRJET LOOMS YEAR 2005 2300mm CAM

POSITIVE CAM
2 NOZZLES
6 HEALDFRAMES
1.5 WARP and CLOTH BEAM

QUANTITY: 56 SETS

NUMBER: AAEP-1111
TSUDAKOMA ZAX N AIRJET LOOM
YEAR 2006 CAM WIDTH 1900mm

24 SETS 6 COLORS
8 SETS 4 COLORS
JAPANESE NEGATIVE CAM
6 FRAMES
5 FEEDERS
1.5 BEAM
1.5 ROLLER
5000 to 6000 HEALDS AND DROPPERS

QUANTITY: 32 SETS

NUMBER: AAEP-1159
TSUDAKOMA ZAX 9100 AIRJET LOOMS YEAR 1997 and 2010 1900mm 2 COLORS

PROFILE REED
LENO SELVEDGES
SINGLE BEAM EXECUTION
ELECTRONIC LET OFF
ELECTRONIC TAKE UP
1 WARPBEAM
6 HARNESS FRAMES
5000 HEALD WIRES
5000 DROPPER WIRES
2 WEFT FEEDERS
750 RPM
YEAR: 1997 (30 SETS)
YEAR: 2010 (47 SETS)

QUANTITY: 77 SETS

NUMBER: AAEP-3132
TSUDAKOMA ZAX-N AIRJET LOOMS YEAR 2008 WIDTH 3600mm 2 COLORS CAM

DOUBLE WEAVED 1750mm EACH WIDTH
SINGLE WEAVED MINIMUM 2800mm, MAXIMUM 3700mm WIDTH
EXIT HAS FABRIC ROLLING SYSTEM
WITH STAUBLI 1651 CAM MOTION
MAXIMUM 8 LEVERS, 6 LEVERS INSTALLES
2 COLORS
TUCKING UNITS RIGHT, LEFT AND CENTER
ACCESSORIES PER LOOM:
2 PREWINDERS
1 BATCHING MOTION
6 SHAFTS
5000 HEALDS & DROPPERS
WARP STOP MOTION
3 HALF WARP BEAM 1000mm DIAMETER

QUANTITY: 48

NUMBER: AAEP-2064
TSUDAKOMA ZA2091 AIRJET LOOMS YEAR 1996 and 1997 WIDTH 1900mm 2 COLORS CAM

REINFORCED FOR HEAVY BOTTOM WEIGHT QUALITIES WITH INDIVIDUAL INVERTER FOR SPEED CONTROL AND I-BOARD CONTROL
7 SHAFT POSITIVE CAM MOTION
2 COLORS WITH DOUBLE PICK WEFT INSERTION SYSTEM
(9 NUMBERS) WITH BATCHING MOTION (18 NUMBERS)
INCLUDED PER LOOM:
1 SET OF CAM (1/1, 2/1, 2/2, 4/1, 2/2)
5 HEALD FRAMES (AS FITTED)
1.5 WARP BEAMS (DIAMETER – 914mm)
1 CLOTH ROLL
5000 HEALDWIRES
5000 DROPWIRES
1 PROFILE REED
MACHINE MILL FLOOR

QUANTITY: 36

NUMBER: AAEM-5279
TSUDAKOMA ZAX AIRJET LOOMS YEAR 2002 WIDTH 1900mm – 2 COLORS – CAM

RUNNING CONDITION
WORKING WIDTH 1900mm
FDP SENSOR FOR 2 COLOR
WBS (WEFT BRAKE SYSTEM)
STRETCH NOZZLE
INCLINED CLOTH FELL WITH TOP MOUNTED TEMPLE
INDEPENDENT SUB NOZZLE TIMING CONTROL
BLANK START CONTROL
CAM MOTION STAUBLI TYPE 1661 WITH 07 LEVERS INSTALLED
WARP BEAMS Ø 1016mm
4 HEALD FRAMES
5,000 HEALDS “C” TYPE & 5,000 DROPPERS

QUANTITY: 36

NUMBER: AAEM-6108
TSUDAKOMA ZAX9100 AIR JET LOOMS YEAR 2006 WIDTH 2300mm

QUANTITY: 48

NUMBER: AAEM-5807
TSUDAKOMA ZAX AIRJET DOBBY LOOMS YEAR 2000 WIDTH 1900mm

ELECTRONIC DOBBY TYPE 2861
18 SHAFTS CAPACITY
16 SHAFTS INSTALLED
7 HEALD FRAMES
2 WEFT FEEDERS
2 COLORS
1.5 WARP BEAM OF 1000mm DIAMETER
1.5 CLOTH ROLL
380 VOLTS – 60 HZ

Leave a Reply